Product Description
Ceramic Alumina Parts
Features of the ceramics parts:
1) A variety of specifications available.
2) Satisfy various technical request
3) Lower medium spoilage
4) Good insulation performance and high temperature resistance
5) High strength
6) Used in all electric products, electric heating products and wear resistant machinery parts.
7) OEM, ODM and OBM are welcomed
Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, 200T isostatic pressing and extrusion productive technology etc.
Alumina Ceramic Part Application:
- Furnace process tubes
- Steel tube liners
- Coal handling wear resistance pads
- Thermocouple protection tubes
- Sandblasting nozzles
- Wire drawing dies
- Bushings and caps
- Crucibles
- Tool bits
- Saggers
- Kiln furniture
- Mechanical seals
- Fuel cell parts
- Rollers for hearth furnaces
- Welding nozzles
- Laser parts
- Gas igniters
- Electric insulator
- Ceramic guiders
- Ceramic screwdrivers
- Zirconia oxygen Sensors
- Medical and surgical components
Main performance index about alumina ceramic parts :
| Project | Test the condition | Unit | 99 porcelain | 95 porcelain | Talc porcelain | |
| Backbone | 99%AL2O3 | 95%AL2O3 | MgO.SiO2 | |||
| Physical property | Density of volume | Normal atmospheric temperature | g/cm3 | 3.8 | 3.6 | 2.8 |
| Airtight | Normal atmospheric temperature | . | .Pass | Pass | – | |
| Absorbing water rate | Normal atmospheric temperature | % | 0 | 0 | 0 | |
| Temperature that frit | °C | 1800 | 1650 | 1350 | ||
| Mechanical performance | Rockwell hardness | Normal atmospheric temperature | HRA | 88 | 86 | 76 |
| Resist the intensity of turning back | Normal atmospheric temperature | Mpa | 350 | 320 | 150 | |
| Compression strength | Normal atmospheric temperature | Mpa | 1300 | 1200 | 900 | |
| Hot performance | Use temperature at most | °C | 1700 | 1600 | 1200 | |
| Heat resistant shaking | 20O°C-1100O°C | 10Num | Pass | Pass | Pass | |
| Hot coefficient of expansion | 20O°C-80O°C | ×10-6mm/°C | 6.5-8.5 | 6.5-8.0 | 5.0-6.2 | |
| Heat-conduction rate | 25°C | W/m.k | 29 | 25 | 2.9 | |
| 300°C | W/m.k | 18 | 13 | 2 | ||
| Dielectric constant | The medium lossing | 1MHz2O°C | ×10-4 | ≤2.5 | ≤4 | ≤8.0 |
| The angle tangent is worth | 1MHz8O°C | ×10-4 | ≤3.5 | ≤4.2 | – | |
| Dielectric strength | Normal atmospheric temperature | KV/mm | 15 | 16 | 20 | |
| Dielectric constant | 1MHz2O°C | 9-10.5 | 9-10 | ≤7.5 | ||
| Resistivity of volume | 2O°C | Ω.cm | >1012 | >1012 | >1013 | |
| 10O°C | Ω.cm | 1012-1013 | 1012-1013 | 1010-1011 | ||
| 30O°C | Ω.cm | >1012 | 3.1×109 | 5×108 | ||
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Chemistry: | Organic Insulation |
| Material: | Ceramic |
| Thermal Rating: | 250 250 |
| Maximum Voltage: | <10KV |
| Classification: | Organic Insulating Material |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Where can individuals find reliable information about choosing and installing motor base plates?
When it comes to choosing and installing motor base plates, individuals can find reliable information from various sources. Here are some places where individuals can gather information to make informed decisions:
1. Manufacturer’s Documentation:
One of the primary sources of reliable information is the documentation provided by motor and motor base plate manufacturers. Manufacturers typically provide detailed product specifications, installation guidelines, and technical datasheets that contain valuable information about the selection, installation, and operation of motor base plates. These documents offer insights into the specific requirements, recommended practices, and considerations for choosing and installing motor base plates from the manufacturer’s perspective.
2. Industry Standards and Guidelines:
Industry standards and guidelines established by organizations such as the International Electrotechnical Commission (IEC) and the National Electrical Manufacturers Association (NEMA) can serve as reliable resources. These standards outline best practices, safety requirements, and performance criteria for motor and motor base plate selection and installation. Consulting relevant industry standards can provide individuals with comprehensive information and ensure compliance with industry norms.
3. Technical Publications and Journals:
Technical publications and journals focused on motor systems, electrical engineering, and industrial automation often include articles, case studies, and research papers that discuss motor base plate selection and installation. These publications are valuable resources for individuals seeking in-depth knowledge and insights from experts in the field. Examples of such publications include the IEEE Transactions on Industry Applications, the Journal of Electrical Engineering, and the Industrial Electronics Society’s Conference Publications.
4. Online Resources and Forums:
The internet offers a wealth of information through websites, forums, and online communities dedicated to motors, motor systems, and related topics. Websites of motor manufacturers, industry associations, and engineering organizations often provide resources, FAQs, and technical articles on motor base plate selection and installation. Online forums and communities allow individuals to seek advice, share experiences, and learn from the collective knowledge of professionals and enthusiasts in the field.
5. Consultation with Experts:
For complex or specialized applications, consulting with experts in the field, such as electrical engineers, motor system integrators, or consultants, can provide personalized guidance and recommendations. These experts can assess specific requirements, offer insights into motor base plate selection, and provide guidance on proper installation techniques based on their experience and expertise.
It’s important to cross-reference information from multiple sources to ensure accuracy and reliability. Motor base plate selection and installation can vary depending on factors such as motor type, application requirements, environmental conditions, and specific system constraints. Considering a range of reliable information sources can help individuals make well-informed decisions and ensure proper installation of motor base plates.
In summary, individuals can find reliable information about choosing and installing motor base plates from manufacturer documentation, industry standards and guidelines, technical publications and journals, online resources and forums, and through consultation with experts. By leveraging these resources, individuals can gather the necessary knowledge and guidance to make informed decisions and ensure successful motor base plate selection and installation for their specific applications.
Are there standard dimensions for motor base plates, or are they customizable?
Motor base plates can have both standard dimensions and customizable options, depending on the specific requirements of the motor and its intended application.
Many motor manufacturers provide standard base plates that are designed to accommodate their specific motor models. These standard base plates typically have predetermined dimensions and hole patterns that align with the motor’s mounting configuration. The dimensions of these base plates are often based on industry standards and guidelines, such as those provided by organizations like the National Electrical Manufacturers Association (NEMA).
Standard base plates are convenient and readily available, making motor installation easier and more efficient. They ensure compatibility between the motor and the base plate, which is important for proper alignment and support.
However, there are also instances where custom motor base plates are required. Customization may be necessary when dealing with unique motor designs, non-standard mounting arrangements, or specific installation constraints. In such cases, motor base plates can be fabricated or modified to meet the specific dimensional and mounting requirements of the motor.
Customizable base plates offer flexibility in adapting to different motor sizes, configurations, and installation conditions. They can be tailored to accommodate variations in motor footprints, shaft heights, and bolt hole patterns. This allows for precise alignment and secure mounting of the motor.
It’s important to note that even when using standard base plates, there may still be some degree of customization required, such as drilling additional holes or making minor modifications to fit the specific installation. This ensures proper alignment and secure attachment of the motor to the base plate.
In summary, motor base plates can have both standard dimensions and customizable options. Standard base plates are widely available and designed to fit specific motor models, while custom base plates offer flexibility to accommodate unique motor requirements or installation constraints.
Are there different types of motor base plates available for various motor sizes?
Yes, there are different types of motor base plates available to accommodate various motor sizes. Here’s a detailed explanation:
Motor base plates are designed to provide a secure and stable mounting platform for electric motors, regardless of their size. Manufacturers offer a range of base plate options to ensure compatibility with different motor sizes and configurations. The specific types of motor base plates available may vary depending on the manufacturer and the intended application.
Here are some common types of motor base plates:
1. Fixed Base Plates: Fixed motor base plates are a standard option for smaller motors. They have a fixed design and do not offer adjustable mounting slots or bolt-hole patterns. These base plates are typically used for motors with a consistent frame size and mounting configuration.
2. Slotted Base Plates: Slotted motor base plates feature adjustable slots or elongated holes to accommodate a range of motor sizes and mounting configurations. The slots allow for fine-tuning the motor’s position and alignment. Slotted base plates provide more flexibility compared to fixed base plates and are commonly used for motors with varying frame sizes and mounting requirements.
3. Adjustable Base Plates: Adjustable motor base plates offer a high degree of flexibility in terms of motor size and mounting options. These base plates typically feature multiple sets of mounting holes or slots that can be adjusted to accommodate different motor sizes, frame styles, and mounting orientations. Adjustable base plates provide versatility for motor installations in diverse industrial applications.
4. Custom Base Plates: In some cases, especially for unique motor sizes or specialized applications, custom motor base plates may be required. Custom base plates are designed and fabricated to meet specific motor requirements, taking into account factors such as motor dimensions, weight, mounting configuration, and alignment needs. These base plates are tailored to ensure a precise fit and optimal performance for the specific motor.
It’s important to consult motor manufacturers, suppliers, or industry experts to determine the appropriate motor base plate for a specific motor size and application. They can provide guidance on selecting the right base plate type and ensure compatibility with the motor’s dimensions, mounting requirements, and alignment specifications.
By offering different types of motor base plates, manufacturers cater to the diverse needs of various motor sizes and configurations, enabling reliable and efficient motor installations in industrial applications.
editor by CX 2024-05-08
China high quality 5-10mm Bakelite 3021 Phenolic Resin Paper Plate for Electrical Appliances vacuum pump ac
Product Description
Good Quality 3571 Phenolic Resin Paper Bakelite Plate
1. Phenolic paper laminate plate
Made of insulation paper impregnated with phenolic resin in backing, pressing and curing. Widely used as
insulating structure parts in motor, electrical equipment and can be used in transformer oil.
Suitable for being the backup board for PCB, swich cabinet, jag board, die splint, packing machine, high
frequency welding machine, forming machine, drilling machine and table grinding machine, etc.
2. Product Details
3. Application Details
4. Packing and Delivery
Xihu (West Lake) Dis. way: By sea, By air or By express according your choice.
We try our best to pack and protect the goods according to custome’s requirment base on different
sizes, hardness and other details.
5. Our Service
Your inquiry related to our products or prices will be replied within 24hours.
Experienced staffs to answer all your enquires in fluent English with professional knowledge.
What we supplied for you is not only the products but also the best service and confidence.
Protection of all your private business information.
One time cooperation, long time partners.
In case of any quality problem, we will firstly compenstate customer and not let the customer has any lost.
We will provide you any update news about your order status.
6. Company Information
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Electrical Base, Shell, Motor |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Organic Insulation |
| Material: | Paper & Resin |
| Thermal Rating: | E 120 |
| Maximum Voltage: | 10KV~20KV |
| Samples: |
US$ 0.1/kg
1 kg(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Can motor base plates be used with both AC and DC electric motors?
Yes, motor base plates can be used with both AC and DC electric motors. The motor base plate serves as a mounting surface for the motor and provides a stable foundation for its installation. It is a structural component that is generally designed to accommodate various motor types, including both AC and DC motors. Here’s how motor base plates can be used with AC and DC electric motors:
1. AC Electric Motors:
AC electric motors, which include induction motors and synchronous motors, can be mounted on motor base plates. The base plate provides a flat and rigid surface on which the motor can be securely attached. The mounting arrangement typically involves aligning the motor’s mounting holes with the corresponding holes on the base plate and securing the motor in place using appropriate fasteners. The base plate ensures that the motor is properly supported and aligned, enabling efficient power transmission and minimizing vibrations.
2. DC Electric Motors:
Similar to AC motors, DC electric motors can also be mounted on motor base plates. DC motors, which include brushed and brushless DC motors, require a sturdy and level base for installation. The base plate provides the necessary stability and support for the motor. The mounting process involves aligning the motor’s mounting holes with those on the base plate and fastening the motor securely. By using a motor base plate, the DC motor can be securely mounted, allowing for smooth and reliable operation.
The design and specifications of motor base plates may vary depending on the motor size, mounting requirements, and specific application needs. However, the fundamental purpose of the base plate remains the same: to provide a solid and secure platform for mounting the motor, regardless of whether it is an AC or DC motor.
It’s important to note that while the motor base plate can be used with both AC and DC electric motors, there may be certain design considerations or additional components required depending on the specific motor type. For example, AC motors may require additional provisions for cooling or ventilation, while DC motors may need appropriate connections for power input and control signals.
In summary, motor base plates are versatile and can be used with both AC and DC electric motors. They provide a stable mounting surface, ensuring proper alignment and support for the motor. By using motor base plates, manufacturers and users can simplify the installation process and ensure reliable operation of AC and DC electric motors in a wide range of applications.
Can motor base plates accommodate motors with varying horsepower ratings?
Yes, motor base plates are designed to accommodate motors with varying horsepower ratings. The base plate’s dimensions and structural integrity are typically engineered to support a range of motor sizes and power ratings.
Motor base plates are often designed with standardized dimensions based on industry standards, such as those provided by organizations like the National Electrical Manufacturers Association (NEMA). These standards ensure that the base plates can accommodate motors of different sizes, including varying horsepower ratings.
When selecting a motor base plate, it is important to consider the specific requirements of the motor, including its horsepower rating. The base plate should have sufficient load capacity to support the weight of the motor and handle the torque and vibrations generated by the motor during operation.
The dimensions of the base plate, such as length, width, and height, are typically chosen to provide ample space for mounting and securing motors with varying horsepower ratings. Additionally, the base plate may include multiple sets of mounting holes or slots to allow for flexibility in positioning the motor and aligning it with driven equipment.
It is important to consult the manufacturer’s specifications and guidelines when selecting a motor base plate to ensure compatibility with the specific motor’s horsepower rating. The manufacturer will provide recommendations regarding the appropriate base plate size and load capacity that can safely accommodate the motor’s power requirements.
Overall, motor base plates are designed to be versatile and accommodate motors with varying horsepower ratings. By choosing a base plate that aligns with the motor’s specifications and adheres to industry standards, the motor can be securely mounted and supported for optimal performance, regardless of its horsepower rating.
Are there different types of motor base plates available for various motor sizes?
Yes, there are different types of motor base plates available to accommodate various motor sizes. Here’s a detailed explanation:
Motor base plates are designed to provide a secure and stable mounting platform for electric motors, regardless of their size. Manufacturers offer a range of base plate options to ensure compatibility with different motor sizes and configurations. The specific types of motor base plates available may vary depending on the manufacturer and the intended application.
Here are some common types of motor base plates:
1. Fixed Base Plates: Fixed motor base plates are a standard option for smaller motors. They have a fixed design and do not offer adjustable mounting slots or bolt-hole patterns. These base plates are typically used for motors with a consistent frame size and mounting configuration.
2. Slotted Base Plates: Slotted motor base plates feature adjustable slots or elongated holes to accommodate a range of motor sizes and mounting configurations. The slots allow for fine-tuning the motor’s position and alignment. Slotted base plates provide more flexibility compared to fixed base plates and are commonly used for motors with varying frame sizes and mounting requirements.
3. Adjustable Base Plates: Adjustable motor base plates offer a high degree of flexibility in terms of motor size and mounting options. These base plates typically feature multiple sets of mounting holes or slots that can be adjusted to accommodate different motor sizes, frame styles, and mounting orientations. Adjustable base plates provide versatility for motor installations in diverse industrial applications.
4. Custom Base Plates: In some cases, especially for unique motor sizes or specialized applications, custom motor base plates may be required. Custom base plates are designed and fabricated to meet specific motor requirements, taking into account factors such as motor dimensions, weight, mounting configuration, and alignment needs. These base plates are tailored to ensure a precise fit and optimal performance for the specific motor.
It’s important to consult motor manufacturers, suppliers, or industry experts to determine the appropriate motor base plate for a specific motor size and application. They can provide guidance on selecting the right base plate type and ensure compatibility with the motor’s dimensions, mounting requirements, and alignment specifications.
By offering different types of motor base plates, manufacturers cater to the diverse needs of various motor sizes and configurations, enabling reliable and efficient motor installations in industrial applications.
editor by CX 2024-05-07
China high quality Roller Kiln Refractory Mullite Ceramic Plate vacuum pump engine
Product Description
Roller Kiln Refractory Mullite Ceramic Plate
Performance for Mullite Ceramic :
| Item | Alumina | Dense Cordierite | Porous Cordierite | Cordierite-Mullite | Mullite | Corundum Mullite | |
| Density (g/cm3) | 2.0-2.3 | 2.1-2.5 | 1.5-1.9 | 1.8-2.3 | 2.0-2.5 | 2.3-2.7 | |
| Coefficient of Heat Expansion (20-800°C) (10-6 K-1) | ≤5 | ≤3.5 | ≤3.0 | ≤3.5 | ≤5 | ≤6 | |
| Thermal Conductivity (W/MK) | 1.5-2.0 | 1.5-2.5 | 1.2-1.8 | 1.5-2.0 | 1.5-2.0 | 1.5-2.5 | |
| Specific Heat (20-1000°C) (J/Kg.K) | 900-1150 | 900-1100 | 900-1100 | 900-1150 | 1000-1150 | 1100-1300 | |
| Max. Work Temperature (°C) | 1350 | 1300 | 1300 | 1320 | 1450 | 1550 | |
| Impact Thermal Resistance (°C/min) | ≥300 | ≥300 | ≥350 | ≥350 | ≥350 | ≥300 | |
| Water absorption(%) | 15-25 | ≤2 | 15-25 | 15-25 | 15-25 | 15-25 | |
| Compressive Strength(MPa) | ≥28 | ≥28 | ≥25 | ≥25 | ≥28 | ≥30 | |
| Chemical Composition (%) | Al2O3 | 55-65 | 25-38 | 28-38 | 40-52 | 60-70 | 70-80 |
| SiO2 | 25-35 | 50-60 | 45-55 | 45-55 | 25-35 | 15-25 | |
| MgO | 1~3 | 5 ~10 | 11 ~14 | 7~9 | 0 ~1 | 0 ~2 | |
| Others | <5 | <5 | <5 | <5 | <5 | <5 | |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Alumina Ceramic |
| Material: | Ceramic |
| Thermal Rating: | H 180 |
| Maximum Voltage: | 20KV~100KV |
| Customization: |
Available
|
|
|---|
Where can individuals find reliable information about choosing and installing motor base plates?
When it comes to choosing and installing motor base plates, individuals can find reliable information from various sources. Here are some places where individuals can gather information to make informed decisions:
1. Manufacturer’s Documentation:
One of the primary sources of reliable information is the documentation provided by motor and motor base plate manufacturers. Manufacturers typically provide detailed product specifications, installation guidelines, and technical datasheets that contain valuable information about the selection, installation, and operation of motor base plates. These documents offer insights into the specific requirements, recommended practices, and considerations for choosing and installing motor base plates from the manufacturer’s perspective.
2. Industry Standards and Guidelines:
Industry standards and guidelines established by organizations such as the International Electrotechnical Commission (IEC) and the National Electrical Manufacturers Association (NEMA) can serve as reliable resources. These standards outline best practices, safety requirements, and performance criteria for motor and motor base plate selection and installation. Consulting relevant industry standards can provide individuals with comprehensive information and ensure compliance with industry norms.
3. Technical Publications and Journals:
Technical publications and journals focused on motor systems, electrical engineering, and industrial automation often include articles, case studies, and research papers that discuss motor base plate selection and installation. These publications are valuable resources for individuals seeking in-depth knowledge and insights from experts in the field. Examples of such publications include the IEEE Transactions on Industry Applications, the Journal of Electrical Engineering, and the Industrial Electronics Society’s Conference Publications.
4. Online Resources and Forums:
The internet offers a wealth of information through websites, forums, and online communities dedicated to motors, motor systems, and related topics. Websites of motor manufacturers, industry associations, and engineering organizations often provide resources, FAQs, and technical articles on motor base plate selection and installation. Online forums and communities allow individuals to seek advice, share experiences, and learn from the collective knowledge of professionals and enthusiasts in the field.
5. Consultation with Experts:
For complex or specialized applications, consulting with experts in the field, such as electrical engineers, motor system integrators, or consultants, can provide personalized guidance and recommendations. These experts can assess specific requirements, offer insights into motor base plate selection, and provide guidance on proper installation techniques based on their experience and expertise.
It’s important to cross-reference information from multiple sources to ensure accuracy and reliability. Motor base plate selection and installation can vary depending on factors such as motor type, application requirements, environmental conditions, and specific system constraints. Considering a range of reliable information sources can help individuals make well-informed decisions and ensure proper installation of motor base plates.
In summary, individuals can find reliable information about choosing and installing motor base plates from manufacturer documentation, industry standards and guidelines, technical publications and journals, online resources and forums, and through consultation with experts. By leveraging these resources, individuals can gather the necessary knowledge and guidance to make informed decisions and ensure successful motor base plate selection and installation for their specific applications.
How do motor base plates contribute to ease of maintenance for electric motors?
Motor base plates play a significant role in facilitating ease of maintenance for electric motors. They provide several features and benefits that simplify maintenance tasks and enhance accessibility to the motor components. Here are some ways in which motor base plates contribute to the ease of maintenance:
1. Accessibility: Motor base plates are designed to allow easy access to the motor and its components. They provide a stable and secure platform for the motor, making it easier for maintenance personnel to reach and work on various parts of the motor, such as the bearings, shaft, or wiring connections. The base plate’s design often incorporates strategic openings or cutouts that provide convenient access points for maintenance tasks.
2. Quick Removal and Installation: Motor base plates are typically designed for easy removal and installation of the motor. They often feature mounting arrangements that allow for swift disconnection and reconnection of the motor from the base plate. This simplifies maintenance activities such as motor replacement, inspection, or repair, reducing downtime and enhancing efficiency during maintenance operations.
3. Alignment Assistance: Motor base plates often include alignment features that aid in aligning the motor during installation or maintenance. These features can include reference marks, guides, or built-in leveling mechanisms that help ensure proper alignment between the motor and driven equipment. Proper alignment is critical for optimal motor performance and longevity, and the base plate’s alignment assistance simplifies this aspect of maintenance.
4. Integrated Wiring Channels: Some motor base plates are designed with integrated wiring channels or conduits that enable organized routing and protection of motor wiring. These channels help keep the wiring neatly organized and shielded from potential damage, making it easier to inspect and maintain the wiring connections. They also contribute to a cleaner and safer work environment during maintenance activities.
5. Vibration and Noise Control: Motor base plates may incorporate vibration isolation features or materials to dampen vibrations and reduce noise levels. This not only enhances the motor’s performance but also contributes to a more comfortable and safer maintenance environment. Reduced vibrations and noise make it easier for maintenance personnel to detect and diagnose any abnormal motor behavior or issues during routine inspections.
6. Mounting Provisions for Accessories: Motor base plates often include mounting provisions or brackets for attaching additional accessories or components, such as sensors, controls, or monitoring devices. These provisions simplify the integration of such accessories into the motor system, facilitating maintenance tasks such as sensor replacement or system upgrades.
7. Durability and Corrosion Resistance: Motor base plates are typically constructed from durable materials, such as steel or aluminum, that offer resistance to corrosion and environmental factors. This ensures that the base plate remains robust and reliable over time, reducing the need for frequent maintenance or replacement. The use of corrosion-resistant materials also simplifies cleaning and maintenance of the base plate itself.
By incorporating these features and benefits, motor base plates contribute to the ease of maintenance for electric motors. They enable easier access, quick removal and installation, alignment assistance, organized wiring routing, vibration control, mounting provisions, and durable construction. These aspects collectively streamline maintenance tasks, improve efficiency, and contribute to the overall reliability and longevity of the electric motor system.
What materials are commonly used in the construction of durable motor base plates?
Motor base plates are constructed using various materials known for their durability and strength. Here’s a detailed explanation:
1. Steel: Steel is one of the most commonly used materials for motor base plates. It offers excellent strength, rigidity, and resistance to deformation. Steel base plates are typically made from mild steel or stainless steel, depending on the specific application requirements. Mild steel base plates are cost-effective and suitable for general industrial applications, while stainless steel base plates provide enhanced corrosion resistance and are often used in corrosive or hygienic environments.
2. Cast Iron: Cast iron is another popular material for motor base plates, particularly for larger motors. Cast iron base plates offer exceptional stability and rigidity, making them suitable for heavy-duty applications. Cast iron provides excellent vibration damping properties, which helps reduce the transmission of motor vibrations to the surrounding equipment.
3. Aluminum: Aluminum base plates are favored for their lightweight nature, making them suitable for applications where weight reduction is critical. Aluminum offers good strength-to-weight ratio and corrosion resistance. It is commonly used in smaller motors or applications where mobility or ease of handling is important.
4. Composite Materials: In some cases, composite materials may be used to construct motor base plates. Composite base plates are made by combining materials such as fiberglass, carbon fiber, or reinforced plastics with resins. These materials offer high strength, low weight, and resistance to corrosion. Composite base plates are often used in specialized applications where specific properties like electrical insulation or chemical resistance are required.
It’s important to note that the choice of material for a motor base plate depends on factors such as motor size, application requirements, environmental conditions, and budget constraints. Manufacturers and industry standards may provide guidelines for selecting the appropriate material based on these factors.
By using durable materials such as steel, cast iron, aluminum, or composites, motor base plates ensure the long-term stability, strength, and reliability of the motor installation in various industrial applications.
editor by CX 2024-04-24
China high quality Alumina Ceramic Heating Plate Refractory Ceramic Plate vacuum pump distributors
Product Description
Ceramic Alumina Parts
Features of the ceramics parts:
1) A variety of specifications available.
2) Satisfy various technical request
3) Lower medium spoilage
4) Good insulation performance and high temperature resistance
5) High strength
6) Used in all electric products, electric heating products and wear resistant machinery parts.
7) OEM, ODM and OBM are welcomed
Alumina ceramic is kind of structural ceramics, with insulation resistance, voltage resistance, high strength, good thermal conductivity, dielectric loss, stable electrical performance characteristics. Used in electronic ceramic substrates, ceramic electrical insulation, vacuum devices, devices porcelain, spark plugs and other products. We can make the part by hot injection pressing, dry pressing, 200T isostatic pressing and extrusion productive technology etc.
Alumina Ceramic Part Application:
- Furnace process tubes
- Steel tube liners
- Coal handling wear resistance pads
- Thermocouple protection tubes
- Sandblasting nozzles
- Wire drawing dies
- Bushings and caps
- Crucibles
- Tool bits
- Saggers
- Kiln furniture
- Mechanical seals
- Fuel cell parts
- Rollers for hearth furnaces
- Welding nozzles
- Laser parts
- Gas igniters
- Electric insulator
- Ceramic guiders
- Ceramic screwdrivers
- Zirconia oxygen Sensors
- Medical and surgical components
Main performance index about alumina ceramic parts :
| Project | Test the condition | Unit | 99 porcelain | 95 porcelain | Talc porcelain | |
| Backbone | 99%AL2O3 | 95%AL2O3 | MgO.SiO2 | |||
| Physical property | Density of volume | Normal atmospheric temperature | g/cm3 | 3.8 | 3.6 | 2.8 |
| Airtight | Normal atmospheric temperature | . | .Pass | Pass | – | |
| Absorbing water rate | Normal atmospheric temperature | % | 0 | 0 | 0 | |
| Temperature that frit | °C | 1800 | 1650 | 1350 | ||
| Mechanical performance | Rockwell hardness | Normal atmospheric temperature | HRA | 88 | 86 | 76 |
| Resist the intensity of turning back | Normal atmospheric temperature | Mpa | 350 | 320 | 150 | |
| Compression strength | Normal atmospheric temperature | Mpa | 1300 | 1200 | 900 | |
| Hot performance | Use temperature at most | °C | 1700 | 1600 | 1200 | |
| Heat resistant shaking | 20O°C-1100O°C | 10Num | Pass | Pass | Pass | |
| Hot coefficient of expansion | 20O°C-80O°C | ×10-6mm/°C | 6.5-8.5 | 6.5-8.0 | 5.0-6.2 | |
| Heat-conduction rate | 25°C | W/m.k | 29 | 25 | 2.9 | |
| 300°C | W/m.k | 18 | 13 | 2 | ||
| Dielectric constant | The medium lossing | 1MHz2O°C | ×10-4 | ≤2.5 | ≤4 | ≤8.0 |
| The angle tangent is worth | 1MHz8O°C | ×10-4 | ≤3.5 | ≤4.2 | – | |
| Dielectric strength | Normal atmospheric temperature | KV/mm | 15 | 16 | 20 | |
| Dielectric constant | 1MHz2O°C | 9-10.5 | 9-10 | ≤7.5 | ||
| Resistivity of volume | 2O°C | Ω.cm | >1012 | >1012 | >1013 | |
| 10O°C | Ω.cm | 1012-1013 | 1012-1013 | 1010-1011 | ||
| 30O°C | Ω.cm | >1012 | 3.1×109 | 5×108 | ||
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Chemistry: | Organic Insulation |
| Material: | Ceramic |
| Thermal Rating: | 250 250 |
| Maximum Voltage: | <10KV |
| Classification: | Organic Insulating Material |
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What role does corrosion resistance play in the selection of motor base plates?
Corrosion resistance plays a crucial role in the selection of motor base plates. The presence of corrosion-resistant properties in the base plate material is essential to ensure the longevity, reliability, and performance of the motor system. Here are the key roles that corrosion resistance plays in the selection of motor base plates:
1. Protection Against Deterioration:
Motor base plates are often exposed to various environmental factors, such as moisture, humidity, chemicals, and airborne contaminants. These elements can cause corrosion, which leads to the deterioration of the base plate material over time. Corrosion resistance is vital to protect the base plate from degradation, ensuring its structural integrity and functionality.
2. Extended Service Life:
A corrosion-resistant motor base plate has a longer service life compared to a non-resistant one. By withstanding the corrosive effects of the environment, the base plate maintains its strength, durability, and performance over an extended period. This reduces the need for frequent maintenance, repairs, or replacements, resulting in cost savings and improved operational efficiency.
3. Reliable Performance:
Corrosion can compromise the performance of the motor system. For example, corrosion on the base plate can weaken its structural support, leading to vibrations or misalignment of the motor. Corrosion can also affect the electrical connections, leading to poor conductivity or potential shorts. By selecting a corrosion-resistant base plate, the risk of such performance issues is minimized, ensuring the motor operates reliably and efficiently.
4. Safety Considerations:
Corrosion can pose safety risks in motor systems. For instance, corroded base plates may become structurally weak, increasing the likelihood of accidents or equipment failures. Additionally, corrosion can affect electrical connections and increase the risk of electrical shocks or malfunctions. Corrosion resistance in the base plate minimizes these safety concerns, promoting a safer working environment for maintenance personnel and reducing the risk of accidents or injuries.
5. Environmental Compatibility:
Corrosion resistance is particularly important when motor systems are installed in harsh or corrosive environments. For example, in marine or coastal applications, exposure to saltwater or high humidity levels can accelerate corrosion. By selecting a corrosion-resistant base plate, the motor system can withstand such environments and maintain its performance and reliability over time.
6. Maintenance Simplification:
Corrosion-resistant motor base plates require less maintenance compared to non-resistant ones. They are less prone to corrosion-related issues, reducing the need for frequent cleaning, inspections, or repairs. This simplifies maintenance procedures and minimizes downtime, enhancing the overall efficiency of the motor system.
Considering the crucial roles that corrosion resistance plays in the selection of motor base plates, it is important to choose materials with appropriate corrosion-resistant properties. Common corrosion-resistant materials used for base plates include stainless steel and aluminum alloys. By prioritizing corrosion resistance, motor systems can benefit from enhanced durability, reliable performance, extended service life, improved safety, and reduced maintenance requirements.
How do motor base plates contribute to ease of maintenance for electric motors?
Motor base plates play a significant role in facilitating ease of maintenance for electric motors. They provide several features and benefits that simplify maintenance tasks and enhance accessibility to the motor components. Here are some ways in which motor base plates contribute to the ease of maintenance:
1. Accessibility: Motor base plates are designed to allow easy access to the motor and its components. They provide a stable and secure platform for the motor, making it easier for maintenance personnel to reach and work on various parts of the motor, such as the bearings, shaft, or wiring connections. The base plate’s design often incorporates strategic openings or cutouts that provide convenient access points for maintenance tasks.
2. Quick Removal and Installation: Motor base plates are typically designed for easy removal and installation of the motor. They often feature mounting arrangements that allow for swift disconnection and reconnection of the motor from the base plate. This simplifies maintenance activities such as motor replacement, inspection, or repair, reducing downtime and enhancing efficiency during maintenance operations.
3. Alignment Assistance: Motor base plates often include alignment features that aid in aligning the motor during installation or maintenance. These features can include reference marks, guides, or built-in leveling mechanisms that help ensure proper alignment between the motor and driven equipment. Proper alignment is critical for optimal motor performance and longevity, and the base plate’s alignment assistance simplifies this aspect of maintenance.
4. Integrated Wiring Channels: Some motor base plates are designed with integrated wiring channels or conduits that enable organized routing and protection of motor wiring. These channels help keep the wiring neatly organized and shielded from potential damage, making it easier to inspect and maintain the wiring connections. They also contribute to a cleaner and safer work environment during maintenance activities.
5. Vibration and Noise Control: Motor base plates may incorporate vibration isolation features or materials to dampen vibrations and reduce noise levels. This not only enhances the motor’s performance but also contributes to a more comfortable and safer maintenance environment. Reduced vibrations and noise make it easier for maintenance personnel to detect and diagnose any abnormal motor behavior or issues during routine inspections.
6. Mounting Provisions for Accessories: Motor base plates often include mounting provisions or brackets for attaching additional accessories or components, such as sensors, controls, or monitoring devices. These provisions simplify the integration of such accessories into the motor system, facilitating maintenance tasks such as sensor replacement or system upgrades.
7. Durability and Corrosion Resistance: Motor base plates are typically constructed from durable materials, such as steel or aluminum, that offer resistance to corrosion and environmental factors. This ensures that the base plate remains robust and reliable over time, reducing the need for frequent maintenance or replacement. The use of corrosion-resistant materials also simplifies cleaning and maintenance of the base plate itself.
By incorporating these features and benefits, motor base plates contribute to the ease of maintenance for electric motors. They enable easier access, quick removal and installation, alignment assistance, organized wiring routing, vibration control, mounting provisions, and durable construction. These aspects collectively streamline maintenance tasks, improve efficiency, and contribute to the overall reliability and longevity of the electric motor system.
Can motor base plates be used for both horizontal and vertical motor installations?
Motor base plates are typically designed and manufactured to be used for specific motor installations, either horizontal or vertical. The orientation of the motor base plate depends on the intended installation position of the motor.
Horizontal motor installations involve mounting the motor in a horizontal position, with the shaft parallel to the ground. In this case, the motor base plate is designed to support the weight of the motor and provide a stable platform for mounting it horizontally. The motor base plate may have specific features such as mounting holes and slots that are oriented for horizontal installation.
Vertical motor installations, on the other hand, involve mounting the motor in a vertical position, with the shaft perpendicular to the ground. This type of installation is commonly used in applications such as pumps and compressors. The motor base plate for vertical installations is designed to provide proper support and alignment for the motor in a vertical orientation. It may have features such as additional bracing or reinforcement to ensure stability.
Due to the different requirements and orientations of horizontal and vertical motor installations, it is generally not recommended to use the same motor base plate for both types of installations. Using a base plate intended for horizontal installation in a vertical orientation, or vice versa, may compromise the stability, alignment, and overall performance of the motor.
Therefore, it is important to carefully select the appropriate motor base plate based on the specific installation requirements and orientation of the motor. This ensures proper support, alignment, and safe operation of the motor in either a horizontal or vertical position.
editor by CX 2024-04-19
China supplier High Quality Phenolic Resin Bakrlite Insulation Plate for Electrical Equipment vacuum pump adapter
Product Description
High Quality Phenolic Resin Bakrlite Insulation Plate For Electrical Equipment
1. Phenolic paper laminate plate
Made of insulation paper impregnated with phenolic resin in backing, pressing and curing. Widely used as
insulating structure parts in motor, electrical equipment and can be used in transformer oil.
Suitable for being the backup board for PCB, swich cabinet, jag board, die splint, packing machine, high
frequency welding machine, forming machine, drilling machine and table grinding machine, etc.
2. Product Details
3. Application Details
4. Packing and Delivery
Xihu (West Lake) Dis. way: By sea, By air or By express according your choice.
We try our best to pack and protect the goods according to custome’s requirment base on different
sizes, hardness and other details.
5. Our Service
Your inquiry related to our products or prices will be replied within 24hours.
Experienced staffs to answer all your enquires in fluent English with professional knowledge.
What we supplied for you is not only the products but also the best service and confidence.
Protection of all your private business information.
One time cooperation, long time partners.
In case of any quality problem, we will firstly compenstate customer and not let the customer has any lost.
We will provide you any update news about your order status.
6. Company Information
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Electrical Base, Shell, Motor |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Organic Insulation |
| Material: | Paper & Resin |
| Thermal Rating: | E 120 |
| Maximum Voltage: | 10KV~20KV |
| Samples: |
US$ 0.1/kg
1 kg(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What are the advancements or innovations in motor base plate technology?
In recent years, there have been several advancements and innovations in motor base plate technology aimed at improving performance, efficiency, and ease of use. These advancements have been driven by evolving industry requirements, technological advancements, and the need for more reliable and efficient motor systems. Here are some notable advancements in motor base plate technology:
1. Integrated Cooling Solutions:
One significant advancement in motor base plate technology is the integration of cooling solutions. Motor base plates are now designed with built-in cooling channels or heat pipes to enhance heat dissipation from the motor. These integrated cooling solutions help maintain optimal operating temperatures, especially in high-power applications, and improve overall motor efficiency by reducing thermal losses.
2. Lightweight and High-Strength Materials:
Motor base plates are being manufactured using lightweight and high-strength materials such as aluminum alloys and composite materials. These materials offer improved strength-to-weight ratios, reducing the weight of the motor assembly while maintaining structural integrity. The use of lightweight materials in motor base plates contributes to energy savings, particularly in applications where weight reduction is critical.
3. Enhanced Vibration Damping:
Vibration damping capabilities in motor base plates have been improved to minimize the transmission of vibrations from the motor to the mounting surface. Advanced damping materials and design techniques are employed to reduce vibrations, ensuring smoother motor operation and enhanced overall system performance.
4. Modular and Customizable Designs:
Motor base plates are now available in modular and customizable designs, allowing for easier integration into different motor systems. These modular base plates can be easily adapted to various motor sizes and configurations, providing flexibility and convenience in motor assembly and maintenance.
5. Integrated Sensor Mounting Options:
To simplify the installation and integration of motor sensors, some motor base plates feature integrated sensor mounting options. These base plates have dedicated provisions or slots for mounting position sensors, temperature sensors, or other feedback devices, enabling easier sensor installation and better overall system performance.
6. Improved Corrosion Resistance:
Motor base plates are now manufactured with improved corrosion-resistant coatings or materials to withstand harsh environments. The enhanced corrosion resistance ensures the longevity and reliability of the motor assembly, particularly in applications where exposure to moisture, chemicals, or other corrosive elements is a concern.
These advancements in motor base plate technology contribute to the overall improvement of motor systems by enhancing thermal management, reducing weight, minimizing vibrations, increasing customization options, simplifying sensor integration, and improving durability in challenging operating conditions.
It’s important to note that the specific advancements and innovations in motor base plate technology may vary among manufacturers and depend on specific application requirements. Motor base plate technology continues to evolve, driven by ongoing research and development efforts, as well as feedback from industry users and market demands.
In summary, advancements in motor base plate technology focus on enhancing cooling capabilities, utilizing lightweight materials, improving vibration damping, offering modular and customizable designs, integrating sensor mounting options, and improving corrosion resistance. These advancements contribute to the efficient and reliable operation of motor systems across various industries and applications.
Are there standard dimensions for motor base plates, or are they customizable?
Motor base plates can have both standard dimensions and customizable options, depending on the specific requirements of the motor and its intended application.
Many motor manufacturers provide standard base plates that are designed to accommodate their specific motor models. These standard base plates typically have predetermined dimensions and hole patterns that align with the motor’s mounting configuration. The dimensions of these base plates are often based on industry standards and guidelines, such as those provided by organizations like the National Electrical Manufacturers Association (NEMA).
Standard base plates are convenient and readily available, making motor installation easier and more efficient. They ensure compatibility between the motor and the base plate, which is important for proper alignment and support.
However, there are also instances where custom motor base plates are required. Customization may be necessary when dealing with unique motor designs, non-standard mounting arrangements, or specific installation constraints. In such cases, motor base plates can be fabricated or modified to meet the specific dimensional and mounting requirements of the motor.
Customizable base plates offer flexibility in adapting to different motor sizes, configurations, and installation conditions. They can be tailored to accommodate variations in motor footprints, shaft heights, and bolt hole patterns. This allows for precise alignment and secure mounting of the motor.
It’s important to note that even when using standard base plates, there may still be some degree of customization required, such as drilling additional holes or making minor modifications to fit the specific installation. This ensures proper alignment and secure attachment of the motor to the base plate.
In summary, motor base plates can have both standard dimensions and customizable options. Standard base plates are widely available and designed to fit specific motor models, while custom base plates offer flexibility to accommodate unique motor requirements or installation constraints.
Can motor base plates be used for both horizontal and vertical motor installations?
Motor base plates are typically designed and manufactured to be used for specific motor installations, either horizontal or vertical. The orientation of the motor base plate depends on the intended installation position of the motor.
Horizontal motor installations involve mounting the motor in a horizontal position, with the shaft parallel to the ground. In this case, the motor base plate is designed to support the weight of the motor and provide a stable platform for mounting it horizontally. The motor base plate may have specific features such as mounting holes and slots that are oriented for horizontal installation.
Vertical motor installations, on the other hand, involve mounting the motor in a vertical position, with the shaft perpendicular to the ground. This type of installation is commonly used in applications such as pumps and compressors. The motor base plate for vertical installations is designed to provide proper support and alignment for the motor in a vertical orientation. It may have features such as additional bracing or reinforcement to ensure stability.
Due to the different requirements and orientations of horizontal and vertical motor installations, it is generally not recommended to use the same motor base plate for both types of installations. Using a base plate intended for horizontal installation in a vertical orientation, or vice versa, may compromise the stability, alignment, and overall performance of the motor.
Therefore, it is important to carefully select the appropriate motor base plate based on the specific installation requirements and orientation of the motor. This ensures proper support, alignment, and safe operation of the motor in either a horizontal or vertical position.
editor by CX 2024-04-15
China high quality Yellow 3240 Epoxy Resin Fibre Glass Insulation Laminated Plate vacuum pump adapter
Product Description
yellow 3240 epoxy resin fibre glass insulation laminated plate
1. Specification
1) Thickness: 0.1-120mm
2) Width: 1571X2571mm, 1220*2440mm, 1571*1220mm
2. Property insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
1) Class F(155 degree) laminated sheet
2) High mechanical performance, stable electrical properties, high tempreture
3) Water and heat resistance, stable dielectric property after soaking
3.Application:
Fit for machine, electric apparatus and insulating parts for electronics like motor and transformer.
4. Technical sheet
| No | Performance | Unit | Values | Test result |
| 1 | Vertical banding strength | Mpa | ≥340 | 360 |
| 2 | Bending elastic modulus of appearance | Mpa | ≥24000 | 25000 |
| 3 | Vertical compression strength | Mpa | ≥350 | 380 |
| 4 | Parallel impact strength | KJ/m2 | ≥33 | 34 |
| 5 | Insulation resistance after flooding(D-24/23) | Ω | 5.0×108 | 5.0×108 |
| 6 | Vertical electric strength (In 90±2ºC Oil, sheet 1mm) | MV/m | 14.2 | 14.6 |
| 7 | Peel strength | Mpa | ≥300 | 320 |
| 8 | Parallel breakdown voltage (90±2ºC OIL) | kv | ≥35 | 36 |
| 9 | relative dielectric constant(48-62Hz) | / | ≤5.5 | 5.2 |
| 10 | dielectric loss factor | / | ≤0.04 | 0.03 |
| 11 | T1 long-term CHINAMFG stability | / | ≥130 | 155 |
| 12 | Water absorption( D-24/23, sheet1.6mm) | / | ≤19mg | 16mg |
| 13 | Density insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet |
g/cm³ | 2.0 | 2.0 |
5. Packing
Electrical insulating epoxy fibre resin fiberglass board sheets is put in 1 Plate approx 1ton, and then packing with film.
insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
6. Hot Products
7.FAQ
Q1: How about MOQ?
MOQ is according to different products. Whatever you need, we are glad to quote best price with good quality.
Q2: Can you send samples for testing?
500g Samples are free supplied, but express freight should be taken by client. After making order, we’d like to return freight back.
Q3: How can you guarantee the quality of mass goods is same as the sample sent to me before?We kept another same sample and marked on company when we sent to customer. So our production will be based on.
Q4: Which package do you use?
Package is important part to avoid goods breaking in transportation. We will choose suitable packing depend on materials.Q5: When customer respond quality issues after pick up goods, how to deal with?
1) Customer could supply photos of issued goods for our sales staff and then we’ll verify which part is wrong.
2) If the issue is confirmed, company will negotiate with customers and compensate in coming orders.
Q5: how about your production time?
It is according to the quantity of goods you needs, but usually 15days is enough, if customers need hurrily, we can negotiate.
Q6: incoterm
FOB FCA CIF C&F
8. Company information
ERIC(ZheJiang )TECHNOLOGY GROUP CO.,LTD is a professional manufacturer of
Various electrical insulation materials.
insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
Our main products are as follows:
1.Laminated sheet: epoxy fiberglass cloth sheet & tube, phenolic bakelite sheet
& rod.
2.Fiberglass sleeving: PVC fiberglass sleeve, acrylic fiberglass sleeve, silicone rubber fiberglass sleeve and silicone fiberglass sleeve
3.Electrical composite insulating paper: DMD CHINAMFG NHN etc.
4. Mylar PET film, polyimide film
5.Varnished products
Eric always holds the principle of “Talent-oriented”, puts science and technology in the first place, employs qualified professionals to develop new products and meets market demands.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Hybrid Insulation |
| Material: | Epoxy Resin and Fiberglass |
| Thermal Rating: | F 155 |
| Maximum Voltage: | 20KV~100KV |
| Samples: |
US$ 1/A4
1 A4(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How can users troubleshoot common issues related to motor base plate misalignment?
Troubleshooting common issues related to motor base plate misalignment is essential to ensure the proper functioning and longevity of the motor system. Here are some steps users can take to troubleshoot and address these issues:
1. Visual Inspection:
Perform a visual inspection of the motor base plate and its alignment with respect to the driven equipment. Look for any obvious signs of misalignment, such as gaps, uneven contact, or visible deviations from the expected alignment. Examine the mounting bolts, shims, and other components for looseness, damage, or improper installation.
2. Measurement and Alignment Tools:
Utilize measurement and alignment tools to assess the alignment of the motor base plate. These tools may include precision levels, laser alignment systems, or dial indicators. Measure the alignment in both horizontal and vertical planes to identify any discrepancies or misalignments. This will help determine the extent and direction of the misalignment.
3. Check Mounting Bolts and Shims:
Inspect the mounting bolts and shims that secure the motor base plate to its foundation or frame. Ensure that the bolts are tightened to the recommended torque and that the shims are correctly positioned. Loose bolts or improperly placed shims can contribute to base plate misalignment. Tighten the bolts as necessary and adjust the shims to achieve proper alignment.
4. Adjusting Shims:
If the misalignment is detected, shims can be added or removed strategically to align the base plate correctly. Shims are thin, flat pieces that are placed between the base plate and the mounting surface to adjust the height and tilt. Adding or removing shims in specific areas can help correct misalignment. Follow the manufacturer’s instructions or consult alignment guidelines to ensure proper shim adjustment.
5. Recheck Alignment:
After making adjustments to the shims or mounting bolts, recheck the alignment using the measurement and alignment tools. Ensure that the alignment is within the acceptable tolerances specified by the motor manufacturer or industry standards. Repeat the adjustment process if necessary until the desired alignment is achieved.
6. Verify Coupling Alignment:
In cases where the motor is coupled to driven equipment (e.g., pumps, fans, or compressors), ensure that the coupling alignment is also checked and adjusted if needed. Misalignment between the motor and the driven equipment can contribute to base plate misalignment. Use appropriate coupling alignment tools and techniques to ensure proper alignment between the motor shaft and the driven equipment shaft.
7. Consider Professional Assistance:
If troubleshooting and adjustments performed by the user do not resolve the base plate misalignment or if the misalignment appears severe or complex, it may be necessary to seek professional assistance. Alignment experts or motor service technicians can provide specialized knowledge and equipment to accurately diagnose and correct misalignment issues.
By following these troubleshooting steps, users can identify and address common issues related to motor base plate misalignment. Proper alignment contributes to optimal motor performance, reduced wear and tear, improved energy efficiency, and decreased risk of premature failures or downtime.
Are motor base plates compatible with different types of motor mounts and couplings?
Motor base plates are typically designed to be compatible with various types of motor mounts and couplings, allowing for flexibility in motor installation and integration with other components.
Motor mounts are used to secure the motor to the base plate and provide a means of attaching the motor to the driven equipment or system. Different types of motor mounts include foot mounts, flange mounts, and face mounts, among others. Motor base plates are designed to accommodate these various mount types by incorporating specific hole patterns, slots, or mounting provisions that align with the motor’s mounting configuration. This allows for easy and secure attachment of the motor to the base plate, regardless of the mount type used.
Couplings, on the other hand, are used to connect the motor shaft to the driven equipment’s shaft, enabling power transmission. There are different types of couplings, such as flexible couplings, rigid couplings, and gear couplings, each with its own design and installation requirements. Motor base plates are typically designed to provide adequate clearance and space for the installation of different types of couplings. This ensures that the motor and the coupling can be properly aligned and connected without interference from the base plate.
In some cases, motor base plates may have additional features or provisions specifically designed to facilitate the installation and compatibility with certain types of motor mounts and couplings. For example, they may include adjustable slots or mounting brackets that allow for fine-tuning the alignment or positioning of the motor mount or coupling.
It’s important to note that while motor base plates are generally compatible with different types of motor mounts and couplings, it is still essential to carefully consider the specific requirements and recommendations provided by the motor and coupling manufacturers. This ensures proper alignment, secure attachment, and reliable performance of the motor and its associated components.
In summary, motor base plates are designed to be compatible with various types of motor mounts and couplings. They incorporate specific hole patterns, slots, or mounting provisions to accommodate different mount types and provide sufficient clearance for the installation of various coupling designs. However, it is crucial to follow the manufacturer’s guidelines and recommendations to ensure proper compatibility and performance when integrating motor mounts and couplings with the motor base plate.
What is the purpose of a motor base plate in industrial applications?
A motor base plate serves several important purposes in industrial applications. Here’s a detailed explanation:
1. Mounting Platform: The primary purpose of a motor base plate is to provide a stable and secure mounting platform for electric motors. It serves as a foundation upon which the motor is securely attached, ensuring proper alignment and connection to the driven equipment.
2. Alignment and Positioning: A motor base plate facilitates the precise alignment and positioning of the motor. Proper alignment is crucial for optimal motor performance, efficiency, and longevity. The base plate typically includes adjustable mounting slots or bolt-hole patterns that allow for fine-tuning the motor’s position, ensuring accurate alignment with the driven equipment.
3. Vibration and Noise Reduction: Motor base plates help reduce vibrations and noise generated by electric motors. They provide a stable and rigid structure that minimizes the transmission of motor vibrations to the surrounding equipment and structures. This helps prevent excessive noise, enhances workplace safety, and reduces the risk of mechanical wear and damage caused by vibration-induced fatigue.
4. Safety and Stability: The motor base plate enhances the safety and stability of the motor installation. It helps secure the motor in place, preventing unintended movement or displacement during operation. This is especially critical in industrial environments where shock and vibration can be present. The base plate’s stability ensures reliable and safe motor operation.
5. Maintenance and Serviceability: Motor base plates facilitate maintenance and serviceability tasks. They provide easy access to the motor for inspection, maintenance, and repairs. By securely holding the motor in place, the base plate allows technicians to safely perform tasks such as motor alignment adjustments, bearing replacements, or belt changes.
6. Flexibility and Adaptability: Motor base plates are designed to accommodate different motor sizes, types, and mounting configurations. They offer flexibility and adaptability, allowing for the installation of various motor models without the need for significant modifications or customizations. This simplifies the motor replacement process or the integration of motors into different industrial applications.
Overall, motor base plates play a vital role in industrial applications by providing a stable mounting platform, facilitating precise alignment, reducing vibrations and noise, ensuring safety and stability, enabling maintenance tasks, and offering flexibility for motor installation and adaptation.
editor by CX 2024-04-13
China Best Sales Good Quality Insulation 3240 Fiber Glass Epoxy Laminate Plate vacuum pump brakes
Product Description
Good Quality Insulation 3240 Fiber Glass Epoxy Laminate Plate
1. Epoxy Fiberglass Sheet
Epoxy phenolic glass fabric laminate 3240 is made of alkali-free E-glass cloth impregnated with epoxy resins and phenolic resins by processing under heat and high pressure.This product having high mechanical and dielectric properties, good heat and humidity resistance, can be used inelectrical motors, engines and devices as insulating construction parts in moist cirecumstances and in transformer oil.
2. Product Details
3. Application Details
4. Packing and Delivery
Xihu (West Lake) Dis. way: By sea, By air or By express according your choice.
We try our best to pack and protect the goods according to custome’s requirment base on different
sizes, hardness and other details.
5. Our Service
Your inquiry related to our products or prices will be replied within 24hours.
Experienced staffs to answer all your enquires in fluent English with professional knowledge.
What we supplied for you is not only the products but also the best service and confidence.
Protection of all your private business information.
One time cooperation, long time partners.
In case of any quality problem, we will firstly compenstate customer and not let the customer has any lost.
We will provide you any update news about your order status.
6. Company Information
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Electrical Base, Shell, Motor |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Organic Insulation |
| Material: | Fiberglass |
| Thermal Rating: | B 130 |
| Maximum Voltage: | 20KV~100KV |
| Samples: |
US$ 0.1/kg
1 kg(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Can motor base plates be used with both AC and DC electric motors?
Yes, motor base plates can be used with both AC and DC electric motors. The motor base plate serves as a mounting surface for the motor and provides a stable foundation for its installation. It is a structural component that is generally designed to accommodate various motor types, including both AC and DC motors. Here’s how motor base plates can be used with AC and DC electric motors:
1. AC Electric Motors:
AC electric motors, which include induction motors and synchronous motors, can be mounted on motor base plates. The base plate provides a flat and rigid surface on which the motor can be securely attached. The mounting arrangement typically involves aligning the motor’s mounting holes with the corresponding holes on the base plate and securing the motor in place using appropriate fasteners. The base plate ensures that the motor is properly supported and aligned, enabling efficient power transmission and minimizing vibrations.
2. DC Electric Motors:
Similar to AC motors, DC electric motors can also be mounted on motor base plates. DC motors, which include brushed and brushless DC motors, require a sturdy and level base for installation. The base plate provides the necessary stability and support for the motor. The mounting process involves aligning the motor’s mounting holes with those on the base plate and fastening the motor securely. By using a motor base plate, the DC motor can be securely mounted, allowing for smooth and reliable operation.
The design and specifications of motor base plates may vary depending on the motor size, mounting requirements, and specific application needs. However, the fundamental purpose of the base plate remains the same: to provide a solid and secure platform for mounting the motor, regardless of whether it is an AC or DC motor.
It’s important to note that while the motor base plate can be used with both AC and DC electric motors, there may be certain design considerations or additional components required depending on the specific motor type. For example, AC motors may require additional provisions for cooling or ventilation, while DC motors may need appropriate connections for power input and control signals.
In summary, motor base plates are versatile and can be used with both AC and DC electric motors. They provide a stable mounting surface, ensuring proper alignment and support for the motor. By using motor base plates, manufacturers and users can simplify the installation process and ensure reliable operation of AC and DC electric motors in a wide range of applications.
How do motor base plates contribute to ease of maintenance for electric motors?
Motor base plates play a significant role in facilitating ease of maintenance for electric motors. They provide several features and benefits that simplify maintenance tasks and enhance accessibility to the motor components. Here are some ways in which motor base plates contribute to the ease of maintenance:
1. Accessibility: Motor base plates are designed to allow easy access to the motor and its components. They provide a stable and secure platform for the motor, making it easier for maintenance personnel to reach and work on various parts of the motor, such as the bearings, shaft, or wiring connections. The base plate’s design often incorporates strategic openings or cutouts that provide convenient access points for maintenance tasks.
2. Quick Removal and Installation: Motor base plates are typically designed for easy removal and installation of the motor. They often feature mounting arrangements that allow for swift disconnection and reconnection of the motor from the base plate. This simplifies maintenance activities such as motor replacement, inspection, or repair, reducing downtime and enhancing efficiency during maintenance operations.
3. Alignment Assistance: Motor base plates often include alignment features that aid in aligning the motor during installation or maintenance. These features can include reference marks, guides, or built-in leveling mechanisms that help ensure proper alignment between the motor and driven equipment. Proper alignment is critical for optimal motor performance and longevity, and the base plate’s alignment assistance simplifies this aspect of maintenance.
4. Integrated Wiring Channels: Some motor base plates are designed with integrated wiring channels or conduits that enable organized routing and protection of motor wiring. These channels help keep the wiring neatly organized and shielded from potential damage, making it easier to inspect and maintain the wiring connections. They also contribute to a cleaner and safer work environment during maintenance activities.
5. Vibration and Noise Control: Motor base plates may incorporate vibration isolation features or materials to dampen vibrations and reduce noise levels. This not only enhances the motor’s performance but also contributes to a more comfortable and safer maintenance environment. Reduced vibrations and noise make it easier for maintenance personnel to detect and diagnose any abnormal motor behavior or issues during routine inspections.
6. Mounting Provisions for Accessories: Motor base plates often include mounting provisions or brackets for attaching additional accessories or components, such as sensors, controls, or monitoring devices. These provisions simplify the integration of such accessories into the motor system, facilitating maintenance tasks such as sensor replacement or system upgrades.
7. Durability and Corrosion Resistance: Motor base plates are typically constructed from durable materials, such as steel or aluminum, that offer resistance to corrosion and environmental factors. This ensures that the base plate remains robust and reliable over time, reducing the need for frequent maintenance or replacement. The use of corrosion-resistant materials also simplifies cleaning and maintenance of the base plate itself.
By incorporating these features and benefits, motor base plates contribute to the ease of maintenance for electric motors. They enable easier access, quick removal and installation, alignment assistance, organized wiring routing, vibration control, mounting provisions, and durable construction. These aspects collectively streamline maintenance tasks, improve efficiency, and contribute to the overall reliability and longevity of the electric motor system.
What role does a motor base plate play in reducing vibration and noise from motors?
A motor base plate plays a significant role in reducing vibration and noise generated by motors. It serves as a foundation for mounting the motor and provides several mechanisms for minimizing vibrations and noise transmission.
One of the primary functions of a motor base plate is to provide a stable and rigid platform for the motor. It helps to absorb and dampen vibrations that occur during motor operation. The base plate is typically made of a sturdy material such as cast iron or steel, which helps to minimize the transmission of vibrations to the surrounding structure.
In addition to its structural properties, a motor base plate often incorporates vibration isolation features. These features are designed to decouple the motor from the surrounding environment, further reducing vibrations and noise. Common vibration isolation mechanisms include rubber or elastomer pads, springs, or mounts that provide a cushioning effect and absorb vibration energy.
Furthermore, the design of the motor base plate may include specific features aimed at reducing noise transmission. For example, the base plate can be equipped with acoustic insulation materials or coatings that help to absorb and dampen sound waves generated by the motor. By minimizing the transmission of noise, the base plate contributes to a quieter operating environment.
Proper installation and alignment of the motor on the base plate are also crucial in reducing vibrations and noise. Ensuring that the motor is securely mounted, with proper alignment and tight fastenings, helps to prevent excessive vibrations and subsequent noise generation.
Overall, a motor base plate plays a vital role in reducing vibrations and noise from motors by providing a stable foundation, incorporating vibration isolation mechanisms, and minimizing noise transmission. By effectively managing vibrations and noise, the base plate helps to improve the performance, reliability, and comfort of motor-driven systems.
editor by CX 2024-04-11
China manufacturer High Quality Epoxy Resin Fiberglass Board 3240 Fiberglass Cloth Plate vacuum pump connector
Product Description
High quality Epoxy Resin Fiberglass Board 3240 Fiberglass Cloth Plate
1. Epoxy Fiberglass Sheet
Epoxy phenolic glass fabric laminate 3240 is made of alkali-free E-glass cloth impregnated with epoxy resins and phenolic resins by processing under heat and high pressure.This product having high mechanical and dielectric properties, good heat and humidity resistance, can be used inelectrical motors, engines and devices as insulating construction parts in moist cirecumstances and in transformer oil.
2. Product Details
3. Application Details
4. Packing and Delivery
Xihu (West Lake) Dis. way: By sea, By air or By express according your choice.
We try our best to pack and protect the goods according to custome’s requirment base on different
sizes, hardness and other details.
5. Our Service
Your inquiry related to our products or prices will be replied within 24hours.
Experienced staffs to answer all your enquires in fluent English with professional knowledge.
What we supplied for you is not only the products but also the best service and confidence.
Protection of all your private business information.
One time cooperation, long time partners.
In case of any quality problem, we will firstly compenstate customer and not let the customer has any lost.
We will provide you any update news about your order status.
6. Company Information
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Electrical Base, Shell, Motor |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Organic Insulation |
| Material: | Fiberglass |
| Thermal Rating: | B 130 |
| Maximum Voltage: | 20KV~100KV |
| Samples: |
US$ 0.1/kg
1 kg(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
What are the advancements or innovations in motor base plate technology?
In recent years, there have been several advancements and innovations in motor base plate technology aimed at improving performance, efficiency, and ease of use. These advancements have been driven by evolving industry requirements, technological advancements, and the need for more reliable and efficient motor systems. Here are some notable advancements in motor base plate technology:
1. Integrated Cooling Solutions:
One significant advancement in motor base plate technology is the integration of cooling solutions. Motor base plates are now designed with built-in cooling channels or heat pipes to enhance heat dissipation from the motor. These integrated cooling solutions help maintain optimal operating temperatures, especially in high-power applications, and improve overall motor efficiency by reducing thermal losses.
2. Lightweight and High-Strength Materials:
Motor base plates are being manufactured using lightweight and high-strength materials such as aluminum alloys and composite materials. These materials offer improved strength-to-weight ratios, reducing the weight of the motor assembly while maintaining structural integrity. The use of lightweight materials in motor base plates contributes to energy savings, particularly in applications where weight reduction is critical.
3. Enhanced Vibration Damping:
Vibration damping capabilities in motor base plates have been improved to minimize the transmission of vibrations from the motor to the mounting surface. Advanced damping materials and design techniques are employed to reduce vibrations, ensuring smoother motor operation and enhanced overall system performance.
4. Modular and Customizable Designs:
Motor base plates are now available in modular and customizable designs, allowing for easier integration into different motor systems. These modular base plates can be easily adapted to various motor sizes and configurations, providing flexibility and convenience in motor assembly and maintenance.
5. Integrated Sensor Mounting Options:
To simplify the installation and integration of motor sensors, some motor base plates feature integrated sensor mounting options. These base plates have dedicated provisions or slots for mounting position sensors, temperature sensors, or other feedback devices, enabling easier sensor installation and better overall system performance.
6. Improved Corrosion Resistance:
Motor base plates are now manufactured with improved corrosion-resistant coatings or materials to withstand harsh environments. The enhanced corrosion resistance ensures the longevity and reliability of the motor assembly, particularly in applications where exposure to moisture, chemicals, or other corrosive elements is a concern.
These advancements in motor base plate technology contribute to the overall improvement of motor systems by enhancing thermal management, reducing weight, minimizing vibrations, increasing customization options, simplifying sensor integration, and improving durability in challenging operating conditions.
It’s important to note that the specific advancements and innovations in motor base plate technology may vary among manufacturers and depend on specific application requirements. Motor base plate technology continues to evolve, driven by ongoing research and development efforts, as well as feedback from industry users and market demands.
In summary, advancements in motor base plate technology focus on enhancing cooling capabilities, utilizing lightweight materials, improving vibration damping, offering modular and customizable designs, integrating sensor mounting options, and improving corrosion resistance. These advancements contribute to the efficient and reliable operation of motor systems across various industries and applications.
What are the key considerations when installing a motor base plate for optimal performance?
When installing a motor base plate for optimal performance, several key considerations should be taken into account to ensure proper alignment, stability, and functionality of the motor. These considerations include:
1. Base Plate Selection: Choose a base plate that is suitable for the specific motor model and its intended application. Consider factors such as load capacity, material strength, and compatibility with the motor’s mounting configuration. Selecting the appropriate base plate ensures a solid foundation for the motor and supports its overall performance.
2. Mounting Surface: Ensure that the mounting surface for the base plate is flat, level, and sufficiently strong to support the weight and vibrations of the motor. Any irregularities or unevenness in the mounting surface can lead to misalignment, increased vibrations, and potential damage to the motor and base plate.
3. Alignment: Proper alignment of the motor on the base plate is crucial for optimal performance. Follow the manufacturer’s guidelines and recommendations for aligning the motor with respect to the base plate. This includes aligning the shafts, ensuring proper concentricity, and adjusting any necessary shimming to achieve precise alignment.
4. Fastening and Securing: Use appropriate fasteners and secure the motor tightly to the base plate. Follow the manufacturer’s recommended torque specifications for the fasteners to ensure proper tightening without damaging the motor or base plate. Insufficiently tightened fasteners can lead to vibrations, loosening, and compromised performance.
5. Vibration Isolation: If required, incorporate vibration isolation mechanisms to minimize vibrations transmitted to the base plate and surrounding structure. This can include using rubber or elastomer pads, springs, or other vibration-dampening materials between the motor and base plate. Vibration isolation helps reduce noise, enhances motor performance, and extends the lifespan of the motor and its components.
6. Cooling and Ventilation: Consider the motor’s cooling and ventilation requirements when installing the base plate. Ensure that there is adequate space around the motor for proper airflow and heat dissipation. Installing the base plate in a location that allows for efficient cooling helps prevent overheating, which can negatively impact motor performance and reliability.
7. Safety and Compliance: Comply with all relevant safety regulations and guidelines when installing the motor base plate. This includes following electrical codes, ensuring proper grounding, and implementing appropriate safety measures to prevent accidents or hazards during installation and operation.
8. Regular Maintenance: Once the motor base plate is installed, establish a regular maintenance schedule to inspect and monitor the base plate, motor, and associated components. Check for any signs of wear, misalignment, or damage, and address any issues promptly to maintain optimal motor performance over time.
By considering these key factors during the installation of a motor base plate, you can optimize the motor’s performance, enhance its reliability, and ensure safe and efficient operation in its intended application.
How does a motor base plate contribute to the stability and alignment of electric motors?
A motor base plate plays a crucial role in ensuring the stability and alignment of electric motors. Here’s a detailed explanation:
1. Stability: The motor base plate provides a stable foundation for the motor. It is typically made of a rigid material such as steel or cast iron, which helps minimize vibrations and movement. By securely mounting the motor to the base plate, it prevents unintended motor displacement during operation, ensuring that the motor remains in its intended position. This stability is essential to maintain consistent motor performance, prevent damage to the motor or driven equipment, and ensure worker safety.
2. Alignment: Proper alignment is critical for the efficient and reliable operation of electric motors. The motor base plate incorporates features that facilitate precise alignment between the motor and the driven equipment. These features may include adjustable mounting slots, bolt-hole patterns, or alignment guides. By using these alignment aids, technicians can fine-tune the position of the motor on the base plate, ensuring that the motor shaft aligns accurately with the driven equipment’s shaft. This alignment minimizes mechanical stress, reduces energy losses, and enhances the motor’s overall performance and longevity.
3. Vibration Dampening: Electric motors can generate vibrations during operation, which, if left unchecked, can adversely affect the motor’s performance and surrounding equipment. The motor base plate acts as a vibration dampening component by absorbing and dissipating a significant portion of the motor’s vibrations. The rigid construction of the base plate helps minimize the transmission of vibrations to the surrounding structure, reducing noise levels, preventing structural damage, and improving overall system reliability.
4. Structural Integrity: The motor base plate adds structural integrity to the motor installation. It provides additional support and rigidity, ensuring that the motor remains securely attached to the base plate and the mounting surface. This structural integrity is particularly important in industrial environments where machinery may be subjected to dynamic forces, such as vibrations or impacts. The base plate’s stability and strength help maintain the motor’s position and prevent any shifting or movement that could lead to misalignment or mechanical failure.
By contributing to stability and alignment, motor base plates play a critical role in optimizing motor performance, reducing wear and tear, preventing premature failures, and maximizing energy efficiency. They provide a solid foundation for electric motors, ensuring they operate reliably and efficiently in various industrial applications.
editor by CX 2024-04-09
China high quality Electrical Insulation Material 3240 Fiber Glass Epoxy Plate vacuum pump oil near me
Product Description
Electrical insulation material 3240 fiber glass epoxy plate
1. Specification
1) Thickness: 0.1-120mm
2) Width: 1571X2571mm, 1220*2440mm, 1571*1220mm
2. Property insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
1) Class F(155 degree) laminated sheet
2) High mechanical performance, stable electrical properties, high tempreture
3) Water and heat resistance, stable dielectric property after soaking
3.Application:
Fit for machine, electric apparatus and insulating parts for electronics like motor and transformer.
4. Technical sheet
| No | Performance | Unit | Values | Test result |
| 1 | Vertical banding strength | Mpa | ≥340 | 360 |
| 2 | Bending elastic modulus of appearance | Mpa | ≥24000 | 25000 |
| 3 | Vertical compression strength | Mpa | ≥350 | 380 |
| 4 | Parallel impact strength | KJ/m2 | ≥33 | 34 |
| 5 | Insulation resistance after flooding(D-24/23) | Ω | 5.0×108 | 5.0×108 |
| 6 | Vertical electric strength (In 90±2ºC Oil, sheet 1mm) | MV/m | 14.2 | 14.6 |
| 7 | Peel strength | Mpa | ≥300 | 320 |
| 8 | Parallel breakdown voltage (90±2ºC OIL) | kv | ≥35 | 36 |
| 9 | relative dielectric constant(48-62Hz) | / | ≤5.5 | 5.2 |
| 10 | dielectric loss factor | / | ≤0.04 | 0.03 |
| 11 | T1 long-term CHINAMFG stability | / | ≥130 | 155 |
| 12 | Water absorption( D-24/23, sheet1.6mm) | / | ≤19mg | 16mg |
| 13 | Density Electrical insulation material 3240 fiber glass epoxy plate | g/cm³ | 2.0 | 2.0 |
5. Packing
Electrical insulation material 3240 fiber glass epoxy plate is put in 1 Plate approx 1ton, and then packing with film.
6.Customer Reviews
7. Hot products
7. Company information
ERIC(ZheJiang )TECHNOLOGY GROUP CO.,LTD is a professional manufacturer of
Various electrical insulation materials.
insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
Our main products are as follows:
1.Laminated sheet: epoxy fiberglass cloth sheet & tube, phenolic bakelite sheet
& rod.
2.Fiberglass sleeving: PVC fiberglass sleeve, acrylic fiberglass sleeve, silicone rubber fiberglass sleeve and silicone fiberglass sleeve
3.Electrical composite insulating paper: DMD CHINAMFG NHN etc.
4. Mylar PET film, polyimide film
5.Varnished products
Eric always holds the principle of “Talent-oriented”, puts science and technology in the first place, employs qualified professionals to develop new products and meets market demands.
8.FAQ
Q1: How about MOQ?
MOQ is according to different products. Whatever you need, we are glad to quote best price with good quality.
Q2: Can you send samples for testing?
500g Samples are free supplied, but express freight should be taken by client. After making order, we’d like to return freight back.
Q3: How can you guarantee the quality of mass goods is same as the sample sent to me before?We kept another same sample and marked on company when we sent to customer. So our production will be based on.
Q4: Which package do you use?
Package is important part to avoid goods breaking in transportation. We will choose suitable packing depend on materials.Q5: When customer respond quality issues after pick up goods, how to deal with?
1) Customer could supply photos of issued goods for our sales staff and then we’ll verify which part is wrong.
2) If the issue is confirmed, company will negotiate with customers and compensate in coming orders.
Q5: how about your production time?
It is according to the quantity of goods you needs, but usually 15days is enough, if customers need hurrily, we can negotiate.
Q6: incoterm
FOB FCA CIF C&F
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Hybrid Insulation |
| Material: | Epoxy Resin and Fiberglass |
| Thermal Rating: | F 155 |
| Maximum Voltage: | 20KV~100KV |
| Samples: |
US$ 1/A4
1 A4(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Can motor base plates be used in outdoor or harsh environmental conditions?
Yes, motor base plates can be used in outdoor or harsh environmental conditions, provided they are designed and constructed to withstand the specific challenges posed by such conditions. Here are some considerations regarding the use of motor base plates in outdoor or harsh environments:
1. Material Selection:
The choice of materials for motor base plates is critical when considering outdoor or harsh environments. Base plates made from corrosion-resistant materials, such as stainless steel or aluminum alloys, are often preferred. These materials offer protection against rust, oxidation, and other forms of corrosion, which can be accelerated in outdoor or corrosive environments.
2. Weatherproof Design:
Motor base plates used in outdoor environments should be designed to provide weatherproofing. This typically involves incorporating features such as gaskets, seals, or coatings to prevent moisture, dust, and other environmental contaminants from entering the motor enclosure. Weatherproof designs help protect the motor and its components from damage or malfunction caused by exposure to rain, humidity, extreme temperatures, or airborne particles.
3. IP Rating:
Motor base plates may have Ingress Protection (IP) ratings that indicate their level of protection against dust and water intrusion. IP ratings consist of two digits, with the first digit representing the level of protection against solid particles and the second digit representing the level of protection against water. It is important to select a motor base plate with an appropriate IP rating that matches the environmental conditions in which it will be used.
4. UV Resistance:
If the motor base plate is exposed to direct sunlight in outdoor applications, UV resistance is crucial to prevent degradation or discoloration of the materials over time. UV-resistant coatings or materials can be applied to the base plate to enhance its durability and longevity in outdoor environments.
5. Vibration and Shock Resistance:
Outdoor or harsh environments may involve higher levels of vibration or mechanical shocks. Motor base plates should be designed to withstand these conditions and provide adequate vibration isolation to protect the motor and its components. Reinforced structures, shock-absorbing materials, or vibration-damping mechanisms can be incorporated into the base plate design to enhance its resilience.
6. Environmental Considerations:
When using motor base plates in specific outdoor or harsh environments, it is important to consider the specific environmental factors present. For example, in marine or coastal applications, additional protection against saltwater corrosion may be necessary. In industrial environments with exposure to chemicals, the base plate should be resistant to chemical agents or be adequately coated to prevent damage.
7. Regular Maintenance:
Even with robust design considerations, regular maintenance is essential to ensure the longevity and performance of motor base plates in outdoor or harsh environments. This may involve periodic inspections, cleaning, lubrication, and replacement of any damaged or worn-out components.
By considering these factors and selecting motor base plates specifically designed for outdoor or harsh environments, it is possible to use them effectively and reliably in challenging conditions. Proper design, material selection, weatherproofing, and maintenance practices contribute to the longevity and performance of the motor system, even in demanding outdoor or harsh environmental conditions.
How do motor base plates contribute to ease of maintenance for electric motors?
Motor base plates play a significant role in facilitating ease of maintenance for electric motors. They provide several features and benefits that simplify maintenance tasks and enhance accessibility to the motor components. Here are some ways in which motor base plates contribute to the ease of maintenance:
1. Accessibility: Motor base plates are designed to allow easy access to the motor and its components. They provide a stable and secure platform for the motor, making it easier for maintenance personnel to reach and work on various parts of the motor, such as the bearings, shaft, or wiring connections. The base plate’s design often incorporates strategic openings or cutouts that provide convenient access points for maintenance tasks.
2. Quick Removal and Installation: Motor base plates are typically designed for easy removal and installation of the motor. They often feature mounting arrangements that allow for swift disconnection and reconnection of the motor from the base plate. This simplifies maintenance activities such as motor replacement, inspection, or repair, reducing downtime and enhancing efficiency during maintenance operations.
3. Alignment Assistance: Motor base plates often include alignment features that aid in aligning the motor during installation or maintenance. These features can include reference marks, guides, or built-in leveling mechanisms that help ensure proper alignment between the motor and driven equipment. Proper alignment is critical for optimal motor performance and longevity, and the base plate’s alignment assistance simplifies this aspect of maintenance.
4. Integrated Wiring Channels: Some motor base plates are designed with integrated wiring channels or conduits that enable organized routing and protection of motor wiring. These channels help keep the wiring neatly organized and shielded from potential damage, making it easier to inspect and maintain the wiring connections. They also contribute to a cleaner and safer work environment during maintenance activities.
5. Vibration and Noise Control: Motor base plates may incorporate vibration isolation features or materials to dampen vibrations and reduce noise levels. This not only enhances the motor’s performance but also contributes to a more comfortable and safer maintenance environment. Reduced vibrations and noise make it easier for maintenance personnel to detect and diagnose any abnormal motor behavior or issues during routine inspections.
6. Mounting Provisions for Accessories: Motor base plates often include mounting provisions or brackets for attaching additional accessories or components, such as sensors, controls, or monitoring devices. These provisions simplify the integration of such accessories into the motor system, facilitating maintenance tasks such as sensor replacement or system upgrades.
7. Durability and Corrosion Resistance: Motor base plates are typically constructed from durable materials, such as steel or aluminum, that offer resistance to corrosion and environmental factors. This ensures that the base plate remains robust and reliable over time, reducing the need for frequent maintenance or replacement. The use of corrosion-resistant materials also simplifies cleaning and maintenance of the base plate itself.
By incorporating these features and benefits, motor base plates contribute to the ease of maintenance for electric motors. They enable easier access, quick removal and installation, alignment assistance, organized wiring routing, vibration control, mounting provisions, and durable construction. These aspects collectively streamline maintenance tasks, improve efficiency, and contribute to the overall reliability and longevity of the electric motor system.
Are there different types of motor base plates available for various motor sizes?
Yes, there are different types of motor base plates available to accommodate various motor sizes. Here’s a detailed explanation:
Motor base plates are designed to provide a secure and stable mounting platform for electric motors, regardless of their size. Manufacturers offer a range of base plate options to ensure compatibility with different motor sizes and configurations. The specific types of motor base plates available may vary depending on the manufacturer and the intended application.
Here are some common types of motor base plates:
1. Fixed Base Plates: Fixed motor base plates are a standard option for smaller motors. They have a fixed design and do not offer adjustable mounting slots or bolt-hole patterns. These base plates are typically used for motors with a consistent frame size and mounting configuration.
2. Slotted Base Plates: Slotted motor base plates feature adjustable slots or elongated holes to accommodate a range of motor sizes and mounting configurations. The slots allow for fine-tuning the motor’s position and alignment. Slotted base plates provide more flexibility compared to fixed base plates and are commonly used for motors with varying frame sizes and mounting requirements.
3. Adjustable Base Plates: Adjustable motor base plates offer a high degree of flexibility in terms of motor size and mounting options. These base plates typically feature multiple sets of mounting holes or slots that can be adjusted to accommodate different motor sizes, frame styles, and mounting orientations. Adjustable base plates provide versatility for motor installations in diverse industrial applications.
4. Custom Base Plates: In some cases, especially for unique motor sizes or specialized applications, custom motor base plates may be required. Custom base plates are designed and fabricated to meet specific motor requirements, taking into account factors such as motor dimensions, weight, mounting configuration, and alignment needs. These base plates are tailored to ensure a precise fit and optimal performance for the specific motor.
It’s important to consult motor manufacturers, suppliers, or industry experts to determine the appropriate motor base plate for a specific motor size and application. They can provide guidance on selecting the right base plate type and ensure compatibility with the motor’s dimensions, mounting requirements, and alignment specifications.
By offering different types of motor base plates, manufacturers cater to the diverse needs of various motor sizes and configurations, enabling reliable and efficient motor installations in industrial applications.
editor by CX 2024-04-04
China high quality Hot Sale Fr4 Glass Fiber Epoxy Resin Insulation Plate vacuum pump distributors
Product Description
Hot Sale FR4 Glass Fiber Epoxy Resin Insulation Plate
1. Epoxy Fiberglass Sheet
Made of E-glass fabric impregnated with epoxy resin by processing under high temperature and
pressure. Having excellent electrical and mechanical properties, good heat and moisture resistance. Applicable
to insulating structural parts in motors, mechanical and electrical equipment, and can be used in transformer oil.
2. Product Details
3. Application Details
4. Packing and Delivery
Xihu (West Lake) Dis. way: By sea, By air or By express according your choice.
We try our best to pack and protect the goods according to custome’s requirment base on different
sizes, hardness and other details.
5. Our Service
Your inquiry related to our products or prices will be replied within 24hours.
Experienced staffs to answer all your enquires in fluent English with professional knowledge.
What we supplied for you is not only the products but also the best service and confidence.
Protection of all your private business information.
One time cooperation, long time partners.
In case of any quality problem, we will firstly compenstate customer and not let the customer has any lost.
We will provide you any update news about your order status.
6. Company Information
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Electrical Base, Shell, Motor |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Organic Insulation |
| Material: | Fiberglass |
| Thermal Rating: | B 130 |
| Maximum Voltage: | 20KV~100KV |
| Samples: |
US$ 1/kg
1 kg(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Where can individuals find reliable information about choosing and installing motor base plates?
When it comes to choosing and installing motor base plates, individuals can find reliable information from various sources. Here are some places where individuals can gather information to make informed decisions:
1. Manufacturer’s Documentation:
One of the primary sources of reliable information is the documentation provided by motor and motor base plate manufacturers. Manufacturers typically provide detailed product specifications, installation guidelines, and technical datasheets that contain valuable information about the selection, installation, and operation of motor base plates. These documents offer insights into the specific requirements, recommended practices, and considerations for choosing and installing motor base plates from the manufacturer’s perspective.
2. Industry Standards and Guidelines:
Industry standards and guidelines established by organizations such as the International Electrotechnical Commission (IEC) and the National Electrical Manufacturers Association (NEMA) can serve as reliable resources. These standards outline best practices, safety requirements, and performance criteria for motor and motor base plate selection and installation. Consulting relevant industry standards can provide individuals with comprehensive information and ensure compliance with industry norms.
3. Technical Publications and Journals:
Technical publications and journals focused on motor systems, electrical engineering, and industrial automation often include articles, case studies, and research papers that discuss motor base plate selection and installation. These publications are valuable resources for individuals seeking in-depth knowledge and insights from experts in the field. Examples of such publications include the IEEE Transactions on Industry Applications, the Journal of Electrical Engineering, and the Industrial Electronics Society’s Conference Publications.
4. Online Resources and Forums:
The internet offers a wealth of information through websites, forums, and online communities dedicated to motors, motor systems, and related topics. Websites of motor manufacturers, industry associations, and engineering organizations often provide resources, FAQs, and technical articles on motor base plate selection and installation. Online forums and communities allow individuals to seek advice, share experiences, and learn from the collective knowledge of professionals and enthusiasts in the field.
5. Consultation with Experts:
For complex or specialized applications, consulting with experts in the field, such as electrical engineers, motor system integrators, or consultants, can provide personalized guidance and recommendations. These experts can assess specific requirements, offer insights into motor base plate selection, and provide guidance on proper installation techniques based on their experience and expertise.
It’s important to cross-reference information from multiple sources to ensure accuracy and reliability. Motor base plate selection and installation can vary depending on factors such as motor type, application requirements, environmental conditions, and specific system constraints. Considering a range of reliable information sources can help individuals make well-informed decisions and ensure proper installation of motor base plates.
In summary, individuals can find reliable information about choosing and installing motor base plates from manufacturer documentation, industry standards and guidelines, technical publications and journals, online resources and forums, and through consultation with experts. By leveraging these resources, individuals can gather the necessary knowledge and guidance to make informed decisions and ensure successful motor base plate selection and installation for their specific applications.
How does the selection of a motor base plate impact the overall performance of the motor?
The selection of a motor base plate can have a significant impact on the overall performance of the motor. The base plate plays a crucial role in providing support, stability, and proper alignment for the motor, which directly affects its performance in several ways.
1. Vibration and Noise: A well-chosen motor base plate helps reduce vibration and noise generated during motor operation. By providing a stable and rigid platform, the base plate minimizes vibrations and prevents excessive noise transmission. It may incorporate vibration isolation features or acoustic insulation materials that further dampen vibrations and reduce noise levels, resulting in a quieter and smoother operation.
2. Alignment: Proper alignment of the motor is essential for optimal performance. The base plate ensures accurate alignment by providing a reference surface and mounting points that are designed to match the motor’s specifications. Correct alignment helps prevent mechanical issues such as shaft misalignment, which can lead to increased wear, decreased efficiency, and premature failure of bearings and other motor components.
3. Heat Dissipation: Motors generate heat during operation, and efficient heat dissipation is crucial for maintaining optimal performance and prolonging the motor’s lifespan. The motor base plate, often made of materials with good thermal conductivity, acts as a heat sink, dissipating heat away from the motor and promoting better cooling. Adequate heat dissipation helps prevent overheating, which can degrade motor performance and reduce its operating efficiency.
4. Structural Integrity: The base plate provides structural support for the motor, ensuring its stability and integrity. A properly selected base plate with sufficient strength and rigidity helps prevent excessive vibrations, mechanical resonance, and structural deformations. It ensures that the motor operates within its design limits, minimizing the risk of damage and maximizing its performance and reliability.
5. Installation Flexibility: The selection of a suitable motor base plate allows for proper installation of the motor in different orientations or mounting configurations. Some base plates are designed specifically for horizontal installations, while others accommodate vertical or customized orientations. Choosing the right base plate ensures that the motor is securely and correctly mounted, which contributes to its overall performance and safe operation.
Overall, the selection of a motor base plate directly impacts the motor’s performance by influencing vibration and noise levels, alignment accuracy, heat dissipation, structural integrity, and installation flexibility. It is important to consider the specific requirements of the motor and its intended application when choosing a base plate to optimize the motor’s overall performance and longevity.
Are there different types of motor base plates available for various motor sizes?
Yes, there are different types of motor base plates available to accommodate various motor sizes. Here’s a detailed explanation:
Motor base plates are designed to provide a secure and stable mounting platform for electric motors, regardless of their size. Manufacturers offer a range of base plate options to ensure compatibility with different motor sizes and configurations. The specific types of motor base plates available may vary depending on the manufacturer and the intended application.
Here are some common types of motor base plates:
1. Fixed Base Plates: Fixed motor base plates are a standard option for smaller motors. They have a fixed design and do not offer adjustable mounting slots or bolt-hole patterns. These base plates are typically used for motors with a consistent frame size and mounting configuration.
2. Slotted Base Plates: Slotted motor base plates feature adjustable slots or elongated holes to accommodate a range of motor sizes and mounting configurations. The slots allow for fine-tuning the motor’s position and alignment. Slotted base plates provide more flexibility compared to fixed base plates and are commonly used for motors with varying frame sizes and mounting requirements.
3. Adjustable Base Plates: Adjustable motor base plates offer a high degree of flexibility in terms of motor size and mounting options. These base plates typically feature multiple sets of mounting holes or slots that can be adjusted to accommodate different motor sizes, frame styles, and mounting orientations. Adjustable base plates provide versatility for motor installations in diverse industrial applications.
4. Custom Base Plates: In some cases, especially for unique motor sizes or specialized applications, custom motor base plates may be required. Custom base plates are designed and fabricated to meet specific motor requirements, taking into account factors such as motor dimensions, weight, mounting configuration, and alignment needs. These base plates are tailored to ensure a precise fit and optimal performance for the specific motor.
It’s important to consult motor manufacturers, suppliers, or industry experts to determine the appropriate motor base plate for a specific motor size and application. They can provide guidance on selecting the right base plate type and ensure compatibility with the motor’s dimensions, mounting requirements, and alignment specifications.
By offering different types of motor base plates, manufacturers cater to the diverse needs of various motor sizes and configurations, enabling reliable and efficient motor installations in industrial applications.
editor by CX 2024-04-04