Product Description
Electrical insulation material 3240 fiber glass epoxy plate
1. Specification
1) Thickness: 0.1-120mm
2) Width: 1571X2571mm, 1220*2440mm, 1571*1220mm
2. Property insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
1) Class F(155 degree) laminated sheet
2) High mechanical performance, stable electrical properties, high tempreture
3) Water and heat resistance, stable dielectric property after soaking
3.Application:
Fit for machine, electric apparatus and insulating parts for electronics like motor and transformer.
4. Technical sheet
| No | Performance | Unit | Values | Test result |
| 1 | Vertical banding strength | Mpa | ≥340 | 360 |
| 2 | Bending elastic modulus of appearance | Mpa | ≥24000 | 25000 |
| 3 | Vertical compression strength | Mpa | ≥350 | 380 |
| 4 | Parallel impact strength | KJ/m2 | ≥33 | 34 |
| 5 | Insulation resistance after flooding(D-24/23) | Ω | 5.0×108 | 5.0×108 |
| 6 | Vertical electric strength (In 90±2ºC Oil, sheet 1mm) | MV/m | 14.2 | 14.6 |
| 7 | Peel strength | Mpa | ≥300 | 320 |
| 8 | Parallel breakdown voltage (90±2ºC OIL) | kv | ≥35 | 36 |
| 9 | relative dielectric constant(48-62Hz) | / | ≤5.5 | 5.2 |
| 10 | dielectric loss factor | / | ≤0.04 | 0.03 |
| 11 | T1 long-term CHINAMFG stability | / | ≥130 | 155 |
| 12 | Water absorption( D-24/23, sheet1.6mm) | / | ≤19mg | 16mg |
| 13 | Density Electrical insulation material 3240 fiber glass epoxy plate | g/cm³ | 2.0 | 2.0 |
5. Packing
Electrical insulation material 3240 fiber glass epoxy plate is put in 1 Plate approx 1ton, and then packing with film.
6.Customer Reviews
7. Hot products
7. Company information
ERIC(ZheJiang )TECHNOLOGY GROUP CO.,LTD is a professional manufacturer of
Various electrical insulation materials.
insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
Our main products are as follows:
1.Laminated sheet: epoxy fiberglass cloth sheet & tube, phenolic bakelite sheet
& rod.
2.Fiberglass sleeving: PVC fiberglass sleeve, acrylic fiberglass sleeve, silicone rubber fiberglass sleeve and silicone fiberglass sleeve
3.Electrical composite insulating paper: DMD CHINAMFG NHN etc.
4. Mylar PET film, polyimide film
5.Varnished products
Eric always holds the principle of “Talent-oriented”, puts science and technology in the first place, employs qualified professionals to develop new products and meets market demands.
8.FAQ
Q1: How about MOQ?
MOQ is according to different products. Whatever you need, we are glad to quote best price with good quality.
Q2: Can you send samples for testing?
500g Samples are free supplied, but express freight should be taken by client. After making order, we’d like to return freight back.
Q3: How can you guarantee the quality of mass goods is same as the sample sent to me before?We kept another same sample and marked on company when we sent to customer. So our production will be based on.
Q4: Which package do you use?
Package is important part to avoid goods breaking in transportation. We will choose suitable packing depend on materials.Q5: When customer respond quality issues after pick up goods, how to deal with?
1) Customer could supply photos of issued goods for our sales staff and then we’ll verify which part is wrong.
2) If the issue is confirmed, company will negotiate with customers and compensate in coming orders.
Q5: how about your production time?
It is according to the quantity of goods you needs, but usually 15days is enough, if customers need hurrily, we can negotiate.
Q6: incoterm
FOB FCA CIF C&F
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Hybrid Insulation |
| Material: | Epoxy Resin and Fiberglass |
| Thermal Rating: | F 155 |
| Maximum Voltage: | 20KV~100KV |
| Samples: |
US$ 1/A4
1 A4(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
Can motor base plates be used in outdoor or harsh environmental conditions?
Yes, motor base plates can be used in outdoor or harsh environmental conditions, provided they are designed and constructed to withstand the specific challenges posed by such conditions. Here are some considerations regarding the use of motor base plates in outdoor or harsh environments:
1. Material Selection:
The choice of materials for motor base plates is critical when considering outdoor or harsh environments. Base plates made from corrosion-resistant materials, such as stainless steel or aluminum alloys, are often preferred. These materials offer protection against rust, oxidation, and other forms of corrosion, which can be accelerated in outdoor or corrosive environments.
2. Weatherproof Design:
Motor base plates used in outdoor environments should be designed to provide weatherproofing. This typically involves incorporating features such as gaskets, seals, or coatings to prevent moisture, dust, and other environmental contaminants from entering the motor enclosure. Weatherproof designs help protect the motor and its components from damage or malfunction caused by exposure to rain, humidity, extreme temperatures, or airborne particles.
3. IP Rating:
Motor base plates may have Ingress Protection (IP) ratings that indicate their level of protection against dust and water intrusion. IP ratings consist of two digits, with the first digit representing the level of protection against solid particles and the second digit representing the level of protection against water. It is important to select a motor base plate with an appropriate IP rating that matches the environmental conditions in which it will be used.
4. UV Resistance:
If the motor base plate is exposed to direct sunlight in outdoor applications, UV resistance is crucial to prevent degradation or discoloration of the materials over time. UV-resistant coatings or materials can be applied to the base plate to enhance its durability and longevity in outdoor environments.
5. Vibration and Shock Resistance:
Outdoor or harsh environments may involve higher levels of vibration or mechanical shocks. Motor base plates should be designed to withstand these conditions and provide adequate vibration isolation to protect the motor and its components. Reinforced structures, shock-absorbing materials, or vibration-damping mechanisms can be incorporated into the base plate design to enhance its resilience.
6. Environmental Considerations:
When using motor base plates in specific outdoor or harsh environments, it is important to consider the specific environmental factors present. For example, in marine or coastal applications, additional protection against saltwater corrosion may be necessary. In industrial environments with exposure to chemicals, the base plate should be resistant to chemical agents or be adequately coated to prevent damage.
7. Regular Maintenance:
Even with robust design considerations, regular maintenance is essential to ensure the longevity and performance of motor base plates in outdoor or harsh environments. This may involve periodic inspections, cleaning, lubrication, and replacement of any damaged or worn-out components.
By considering these factors and selecting motor base plates specifically designed for outdoor or harsh environments, it is possible to use them effectively and reliably in challenging conditions. Proper design, material selection, weatherproofing, and maintenance practices contribute to the longevity and performance of the motor system, even in demanding outdoor or harsh environmental conditions.
How do motor base plates contribute to ease of maintenance for electric motors?
Motor base plates play a significant role in facilitating ease of maintenance for electric motors. They provide several features and benefits that simplify maintenance tasks and enhance accessibility to the motor components. Here are some ways in which motor base plates contribute to the ease of maintenance:
1. Accessibility: Motor base plates are designed to allow easy access to the motor and its components. They provide a stable and secure platform for the motor, making it easier for maintenance personnel to reach and work on various parts of the motor, such as the bearings, shaft, or wiring connections. The base plate’s design often incorporates strategic openings or cutouts that provide convenient access points for maintenance tasks.
2. Quick Removal and Installation: Motor base plates are typically designed for easy removal and installation of the motor. They often feature mounting arrangements that allow for swift disconnection and reconnection of the motor from the base plate. This simplifies maintenance activities such as motor replacement, inspection, or repair, reducing downtime and enhancing efficiency during maintenance operations.
3. Alignment Assistance: Motor base plates often include alignment features that aid in aligning the motor during installation or maintenance. These features can include reference marks, guides, or built-in leveling mechanisms that help ensure proper alignment between the motor and driven equipment. Proper alignment is critical for optimal motor performance and longevity, and the base plate’s alignment assistance simplifies this aspect of maintenance.
4. Integrated Wiring Channels: Some motor base plates are designed with integrated wiring channels or conduits that enable organized routing and protection of motor wiring. These channels help keep the wiring neatly organized and shielded from potential damage, making it easier to inspect and maintain the wiring connections. They also contribute to a cleaner and safer work environment during maintenance activities.
5. Vibration and Noise Control: Motor base plates may incorporate vibration isolation features or materials to dampen vibrations and reduce noise levels. This not only enhances the motor’s performance but also contributes to a more comfortable and safer maintenance environment. Reduced vibrations and noise make it easier for maintenance personnel to detect and diagnose any abnormal motor behavior or issues during routine inspections.
6. Mounting Provisions for Accessories: Motor base plates often include mounting provisions or brackets for attaching additional accessories or components, such as sensors, controls, or monitoring devices. These provisions simplify the integration of such accessories into the motor system, facilitating maintenance tasks such as sensor replacement or system upgrades.
7. Durability and Corrosion Resistance: Motor base plates are typically constructed from durable materials, such as steel or aluminum, that offer resistance to corrosion and environmental factors. This ensures that the base plate remains robust and reliable over time, reducing the need for frequent maintenance or replacement. The use of corrosion-resistant materials also simplifies cleaning and maintenance of the base plate itself.
By incorporating these features and benefits, motor base plates contribute to the ease of maintenance for electric motors. They enable easier access, quick removal and installation, alignment assistance, organized wiring routing, vibration control, mounting provisions, and durable construction. These aspects collectively streamline maintenance tasks, improve efficiency, and contribute to the overall reliability and longevity of the electric motor system.
Are there different types of motor base plates available for various motor sizes?
Yes, there are different types of motor base plates available to accommodate various motor sizes. Here’s a detailed explanation:
Motor base plates are designed to provide a secure and stable mounting platform for electric motors, regardless of their size. Manufacturers offer a range of base plate options to ensure compatibility with different motor sizes and configurations. The specific types of motor base plates available may vary depending on the manufacturer and the intended application.
Here are some common types of motor base plates:
1. Fixed Base Plates: Fixed motor base plates are a standard option for smaller motors. They have a fixed design and do not offer adjustable mounting slots or bolt-hole patterns. These base plates are typically used for motors with a consistent frame size and mounting configuration.
2. Slotted Base Plates: Slotted motor base plates feature adjustable slots or elongated holes to accommodate a range of motor sizes and mounting configurations. The slots allow for fine-tuning the motor’s position and alignment. Slotted base plates provide more flexibility compared to fixed base plates and are commonly used for motors with varying frame sizes and mounting requirements.
3. Adjustable Base Plates: Adjustable motor base plates offer a high degree of flexibility in terms of motor size and mounting options. These base plates typically feature multiple sets of mounting holes or slots that can be adjusted to accommodate different motor sizes, frame styles, and mounting orientations. Adjustable base plates provide versatility for motor installations in diverse industrial applications.
4. Custom Base Plates: In some cases, especially for unique motor sizes or specialized applications, custom motor base plates may be required. Custom base plates are designed and fabricated to meet specific motor requirements, taking into account factors such as motor dimensions, weight, mounting configuration, and alignment needs. These base plates are tailored to ensure a precise fit and optimal performance for the specific motor.
It’s important to consult motor manufacturers, suppliers, or industry experts to determine the appropriate motor base plate for a specific motor size and application. They can provide guidance on selecting the right base plate type and ensure compatibility with the motor’s dimensions, mounting requirements, and alignment specifications.
By offering different types of motor base plates, manufacturers cater to the diverse needs of various motor sizes and configurations, enabling reliable and efficient motor installations in industrial applications.
editor by CX 2024-04-04