Product Description
yellow 3240 epoxy resin fibre glass insulation laminated plate
1. Specification
1) Thickness: 0.1-120mm
2) Width: 1571X2571mm, 1220*2440mm, 1571*1220mm
2. Property insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
1) Class F(155 degree) laminated sheet
2) High mechanical performance, stable electrical properties, high tempreture
3) Water and heat resistance, stable dielectric property after soaking
3.Application:
Fit for machine, electric apparatus and insulating parts for electronics like motor and transformer.
4. Technical sheet
| No | Performance | Unit | Values | Test result |
| 1 | Vertical banding strength | Mpa | ≥340 | 360 |
| 2 | Bending elastic modulus of appearance | Mpa | ≥24000 | 25000 |
| 3 | Vertical compression strength | Mpa | ≥350 | 380 |
| 4 | Parallel impact strength | KJ/m2 | ≥33 | 34 |
| 5 | Insulation resistance after flooding(D-24/23) | Ω | 5.0×108 | 5.0×108 |
| 6 | Vertical electric strength (In 90±2ºC Oil, sheet 1mm) | MV/m | 14.2 | 14.6 |
| 7 | Peel strength | Mpa | ≥300 | 320 |
| 8 | Parallel breakdown voltage (90±2ºC OIL) | kv | ≥35 | 36 |
| 9 | relative dielectric constant(48-62Hz) | / | ≤5.5 | 5.2 |
| 10 | dielectric loss factor | / | ≤0.04 | 0.03 |
| 11 | T1 long-term CHINAMFG stability | / | ≥130 | 155 |
| 12 | Water absorption( D-24/23, sheet1.6mm) | / | ≤19mg | 16mg |
| 13 | Density insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet |
g/cm³ | 2.0 | 2.0 |
5. Packing
Electrical insulating epoxy fibre resin fiberglass board sheets is put in 1 Plate approx 1ton, and then packing with film.
insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
6. Hot Products
7.FAQ
Q1: How about MOQ?
MOQ is according to different products. Whatever you need, we are glad to quote best price with good quality.
Q2: Can you send samples for testing?
500g Samples are free supplied, but express freight should be taken by client. After making order, we’d like to return freight back.
Q3: How can you guarantee the quality of mass goods is same as the sample sent to me before?We kept another same sample and marked on company when we sent to customer. So our production will be based on.
Q4: Which package do you use?
Package is important part to avoid goods breaking in transportation. We will choose suitable packing depend on materials.Q5: When customer respond quality issues after pick up goods, how to deal with?
1) Customer could supply photos of issued goods for our sales staff and then we’ll verify which part is wrong.
2) If the issue is confirmed, company will negotiate with customers and compensate in coming orders.
Q5: how about your production time?
It is according to the quantity of goods you needs, but usually 15days is enough, if customers need hurrily, we can negotiate.
Q6: incoterm
FOB FCA CIF C&F
8. Company information
ERIC(ZheJiang )TECHNOLOGY GROUP CO.,LTD is a professional manufacturer of
Various electrical insulation materials.
insulation material yellow green 3240 fr4 fabric fiber glass resin epoxy laminate sheet
Our main products are as follows:
1.Laminated sheet: epoxy fiberglass cloth sheet & tube, phenolic bakelite sheet
& rod.
2.Fiberglass sleeving: PVC fiberglass sleeve, acrylic fiberglass sleeve, silicone rubber fiberglass sleeve and silicone fiberglass sleeve
3.Electrical composite insulating paper: DMD CHINAMFG NHN etc.
4. Mylar PET film, polyimide film
5.Varnished products
Eric always holds the principle of “Talent-oriented”, puts science and technology in the first place, employs qualified professionals to develop new products and meets market demands.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Type: | Insulation Sheet |
| Chemistry: | Hybrid Insulation |
| Material: | Epoxy Resin and Fiberglass |
| Thermal Rating: | F 155 |
| Maximum Voltage: | 20KV~100KV |
| Samples: |
US$ 1/A4
1 A4(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
How can users troubleshoot common issues related to motor base plate misalignment?
Troubleshooting common issues related to motor base plate misalignment is essential to ensure the proper functioning and longevity of the motor system. Here are some steps users can take to troubleshoot and address these issues:
1. Visual Inspection:
Perform a visual inspection of the motor base plate and its alignment with respect to the driven equipment. Look for any obvious signs of misalignment, such as gaps, uneven contact, or visible deviations from the expected alignment. Examine the mounting bolts, shims, and other components for looseness, damage, or improper installation.
2. Measurement and Alignment Tools:
Utilize measurement and alignment tools to assess the alignment of the motor base plate. These tools may include precision levels, laser alignment systems, or dial indicators. Measure the alignment in both horizontal and vertical planes to identify any discrepancies or misalignments. This will help determine the extent and direction of the misalignment.
3. Check Mounting Bolts and Shims:
Inspect the mounting bolts and shims that secure the motor base plate to its foundation or frame. Ensure that the bolts are tightened to the recommended torque and that the shims are correctly positioned. Loose bolts or improperly placed shims can contribute to base plate misalignment. Tighten the bolts as necessary and adjust the shims to achieve proper alignment.
4. Adjusting Shims:
If the misalignment is detected, shims can be added or removed strategically to align the base plate correctly. Shims are thin, flat pieces that are placed between the base plate and the mounting surface to adjust the height and tilt. Adding or removing shims in specific areas can help correct misalignment. Follow the manufacturer’s instructions or consult alignment guidelines to ensure proper shim adjustment.
5. Recheck Alignment:
After making adjustments to the shims or mounting bolts, recheck the alignment using the measurement and alignment tools. Ensure that the alignment is within the acceptable tolerances specified by the motor manufacturer or industry standards. Repeat the adjustment process if necessary until the desired alignment is achieved.
6. Verify Coupling Alignment:
In cases where the motor is coupled to driven equipment (e.g., pumps, fans, or compressors), ensure that the coupling alignment is also checked and adjusted if needed. Misalignment between the motor and the driven equipment can contribute to base plate misalignment. Use appropriate coupling alignment tools and techniques to ensure proper alignment between the motor shaft and the driven equipment shaft.
7. Consider Professional Assistance:
If troubleshooting and adjustments performed by the user do not resolve the base plate misalignment or if the misalignment appears severe or complex, it may be necessary to seek professional assistance. Alignment experts or motor service technicians can provide specialized knowledge and equipment to accurately diagnose and correct misalignment issues.
By following these troubleshooting steps, users can identify and address common issues related to motor base plate misalignment. Proper alignment contributes to optimal motor performance, reduced wear and tear, improved energy efficiency, and decreased risk of premature failures or downtime.
Are motor base plates compatible with different types of motor mounts and couplings?
Motor base plates are typically designed to be compatible with various types of motor mounts and couplings, allowing for flexibility in motor installation and integration with other components.
Motor mounts are used to secure the motor to the base plate and provide a means of attaching the motor to the driven equipment or system. Different types of motor mounts include foot mounts, flange mounts, and face mounts, among others. Motor base plates are designed to accommodate these various mount types by incorporating specific hole patterns, slots, or mounting provisions that align with the motor’s mounting configuration. This allows for easy and secure attachment of the motor to the base plate, regardless of the mount type used.
Couplings, on the other hand, are used to connect the motor shaft to the driven equipment’s shaft, enabling power transmission. There are different types of couplings, such as flexible couplings, rigid couplings, and gear couplings, each with its own design and installation requirements. Motor base plates are typically designed to provide adequate clearance and space for the installation of different types of couplings. This ensures that the motor and the coupling can be properly aligned and connected without interference from the base plate.
In some cases, motor base plates may have additional features or provisions specifically designed to facilitate the installation and compatibility with certain types of motor mounts and couplings. For example, they may include adjustable slots or mounting brackets that allow for fine-tuning the alignment or positioning of the motor mount or coupling.
It’s important to note that while motor base plates are generally compatible with different types of motor mounts and couplings, it is still essential to carefully consider the specific requirements and recommendations provided by the motor and coupling manufacturers. This ensures proper alignment, secure attachment, and reliable performance of the motor and its associated components.
In summary, motor base plates are designed to be compatible with various types of motor mounts and couplings. They incorporate specific hole patterns, slots, or mounting provisions to accommodate different mount types and provide sufficient clearance for the installation of various coupling designs. However, it is crucial to follow the manufacturer’s guidelines and recommendations to ensure proper compatibility and performance when integrating motor mounts and couplings with the motor base plate.
What is the purpose of a motor base plate in industrial applications?
A motor base plate serves several important purposes in industrial applications. Here’s a detailed explanation:
1. Mounting Platform: The primary purpose of a motor base plate is to provide a stable and secure mounting platform for electric motors. It serves as a foundation upon which the motor is securely attached, ensuring proper alignment and connection to the driven equipment.
2. Alignment and Positioning: A motor base plate facilitates the precise alignment and positioning of the motor. Proper alignment is crucial for optimal motor performance, efficiency, and longevity. The base plate typically includes adjustable mounting slots or bolt-hole patterns that allow for fine-tuning the motor’s position, ensuring accurate alignment with the driven equipment.
3. Vibration and Noise Reduction: Motor base plates help reduce vibrations and noise generated by electric motors. They provide a stable and rigid structure that minimizes the transmission of motor vibrations to the surrounding equipment and structures. This helps prevent excessive noise, enhances workplace safety, and reduces the risk of mechanical wear and damage caused by vibration-induced fatigue.
4. Safety and Stability: The motor base plate enhances the safety and stability of the motor installation. It helps secure the motor in place, preventing unintended movement or displacement during operation. This is especially critical in industrial environments where shock and vibration can be present. The base plate’s stability ensures reliable and safe motor operation.
5. Maintenance and Serviceability: Motor base plates facilitate maintenance and serviceability tasks. They provide easy access to the motor for inspection, maintenance, and repairs. By securely holding the motor in place, the base plate allows technicians to safely perform tasks such as motor alignment adjustments, bearing replacements, or belt changes.
6. Flexibility and Adaptability: Motor base plates are designed to accommodate different motor sizes, types, and mounting configurations. They offer flexibility and adaptability, allowing for the installation of various motor models without the need for significant modifications or customizations. This simplifies the motor replacement process or the integration of motors into different industrial applications.
Overall, motor base plates play a vital role in industrial applications by providing a stable mounting platform, facilitating precise alignment, reducing vibrations and noise, ensuring safety and stability, enabling maintenance tasks, and offering flexibility for motor installation and adaptation.
editor by CX 2024-04-13