Product Description
Load Bearing Board Cordierite Mullite Alumina Ceramic Plate Wholesale Supplier
Performance for Ceramic :
| Item | Alumina | Dense Cordierite | Porous Cordierite | Cordierite-Mullite | Mullite | Corundum Mullite | |
| Density (g/cm3) | 2.0-2.3 | 2.1-2.5 | 1.5-1.9 | 1.8-2.3 | 2.0-2.5 | 2.3-2.7 | |
| Coefficient of Heat Expansion (20-800°C) (10-6 K-1) | ≤5 | ≤3.5 | ≤3.0 | ≤3.5 | ≤5 | ≤6 | |
| Thermal Conductivity (W/MK) | 1.5-2.0 | 1.5-2.5 | 1.2-1.8 | 1.5-2.0 | 1.5-2.0 | 1.5-2.5 | |
| Specific Heat (20-1000°C) (J/Kg.K) | 900-1150 | 900-1100 | 900-1100 | 900-1150 | 1000-1150 | 1100-1300 | |
| Max. Work Temperature (°C) | 1350 | 1300 | 1300 | 1320 | 1450 | 1550 | |
| Impact Thermal Resistance (°C/min) | ≥300 | ≥300 | ≥350 | ≥350 | ≥350 | ≥300 | |
| Water absorption(%) | 15-25 | ≤2 | 15-25 | 15-25 | 15-25 | 15-25 | |
| Compressive Strength(MPa) | ≥28 | ≥28 | ≥25 | ≥25 | ≥28 | ≥30 | |
| Chemical Composition (%) | Al2O3 | 55-65 | 25-38 | 28-38 | 40-52 | 60-70 | 70-80 |
| SiO2 | 25-35 | 50-60 | 45-55 | 45-55 | 25-35 | 15-25 | |
| MgO | 1~3 | 5 ~10 | 11 ~14 | 7~9 | 0 ~1 | 0 ~2 | |
| Others | <5 | <5 | <5 | <5 | <5 | <5 | |
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Insulators, Electrical Winding Insulation, Winding Wire Coating Insulation, Electrical Base, Shell, Motor, Insulating Varnish, Switch Baseplate |
|---|---|
| Type: | Crucible |
| Chemistry: | Alumina Ceramic |
| Material: | Ceramic |
| Thermal Rating: | H 180 |
| Maximum Voltage: | 20KV~100KV |
| Customization: |
Available
|
|
|---|
How can users troubleshoot common issues related to motor base plate misalignment?
Troubleshooting common issues related to motor base plate misalignment is essential to ensure the proper functioning and longevity of the motor system. Here are some steps users can take to troubleshoot and address these issues:
1. Visual Inspection:
Perform a visual inspection of the motor base plate and its alignment with respect to the driven equipment. Look for any obvious signs of misalignment, such as gaps, uneven contact, or visible deviations from the expected alignment. Examine the mounting bolts, shims, and other components for looseness, damage, or improper installation.
2. Measurement and Alignment Tools:
Utilize measurement and alignment tools to assess the alignment of the motor base plate. These tools may include precision levels, laser alignment systems, or dial indicators. Measure the alignment in both horizontal and vertical planes to identify any discrepancies or misalignments. This will help determine the extent and direction of the misalignment.
3. Check Mounting Bolts and Shims:
Inspect the mounting bolts and shims that secure the motor base plate to its foundation or frame. Ensure that the bolts are tightened to the recommended torque and that the shims are correctly positioned. Loose bolts or improperly placed shims can contribute to base plate misalignment. Tighten the bolts as necessary and adjust the shims to achieve proper alignment.
4. Adjusting Shims:
If the misalignment is detected, shims can be added or removed strategically to align the base plate correctly. Shims are thin, flat pieces that are placed between the base plate and the mounting surface to adjust the height and tilt. Adding or removing shims in specific areas can help correct misalignment. Follow the manufacturer’s instructions or consult alignment guidelines to ensure proper shim adjustment.
5. Recheck Alignment:
After making adjustments to the shims or mounting bolts, recheck the alignment using the measurement and alignment tools. Ensure that the alignment is within the acceptable tolerances specified by the motor manufacturer or industry standards. Repeat the adjustment process if necessary until the desired alignment is achieved.
6. Verify Coupling Alignment:
In cases where the motor is coupled to driven equipment (e.g., pumps, fans, or compressors), ensure that the coupling alignment is also checked and adjusted if needed. Misalignment between the motor and the driven equipment can contribute to base plate misalignment. Use appropriate coupling alignment tools and techniques to ensure proper alignment between the motor shaft and the driven equipment shaft.
7. Consider Professional Assistance:
If troubleshooting and adjustments performed by the user do not resolve the base plate misalignment or if the misalignment appears severe or complex, it may be necessary to seek professional assistance. Alignment experts or motor service technicians can provide specialized knowledge and equipment to accurately diagnose and correct misalignment issues.
By following these troubleshooting steps, users can identify and address common issues related to motor base plate misalignment. Proper alignment contributes to optimal motor performance, reduced wear and tear, improved energy efficiency, and decreased risk of premature failures or downtime.
How does the selection of a motor base plate impact the overall performance of the motor?
The selection of a motor base plate can have a significant impact on the overall performance of the motor. The base plate plays a crucial role in providing support, stability, and proper alignment for the motor, which directly affects its performance in several ways.
1. Vibration and Noise: A well-chosen motor base plate helps reduce vibration and noise generated during motor operation. By providing a stable and rigid platform, the base plate minimizes vibrations and prevents excessive noise transmission. It may incorporate vibration isolation features or acoustic insulation materials that further dampen vibrations and reduce noise levels, resulting in a quieter and smoother operation.
2. Alignment: Proper alignment of the motor is essential for optimal performance. The base plate ensures accurate alignment by providing a reference surface and mounting points that are designed to match the motor’s specifications. Correct alignment helps prevent mechanical issues such as shaft misalignment, which can lead to increased wear, decreased efficiency, and premature failure of bearings and other motor components.
3. Heat Dissipation: Motors generate heat during operation, and efficient heat dissipation is crucial for maintaining optimal performance and prolonging the motor’s lifespan. The motor base plate, often made of materials with good thermal conductivity, acts as a heat sink, dissipating heat away from the motor and promoting better cooling. Adequate heat dissipation helps prevent overheating, which can degrade motor performance and reduce its operating efficiency.
4. Structural Integrity: The base plate provides structural support for the motor, ensuring its stability and integrity. A properly selected base plate with sufficient strength and rigidity helps prevent excessive vibrations, mechanical resonance, and structural deformations. It ensures that the motor operates within its design limits, minimizing the risk of damage and maximizing its performance and reliability.
5. Installation Flexibility: The selection of a suitable motor base plate allows for proper installation of the motor in different orientations or mounting configurations. Some base plates are designed specifically for horizontal installations, while others accommodate vertical or customized orientations. Choosing the right base plate ensures that the motor is securely and correctly mounted, which contributes to its overall performance and safe operation.
Overall, the selection of a motor base plate directly impacts the motor’s performance by influencing vibration and noise levels, alignment accuracy, heat dissipation, structural integrity, and installation flexibility. It is important to consider the specific requirements of the motor and its intended application when choosing a base plate to optimize the motor’s overall performance and longevity.
What is the purpose of a motor base plate in industrial applications?
A motor base plate serves several important purposes in industrial applications. Here’s a detailed explanation:
1. Mounting Platform: The primary purpose of a motor base plate is to provide a stable and secure mounting platform for electric motors. It serves as a foundation upon which the motor is securely attached, ensuring proper alignment and connection to the driven equipment.
2. Alignment and Positioning: A motor base plate facilitates the precise alignment and positioning of the motor. Proper alignment is crucial for optimal motor performance, efficiency, and longevity. The base plate typically includes adjustable mounting slots or bolt-hole patterns that allow for fine-tuning the motor’s position, ensuring accurate alignment with the driven equipment.
3. Vibration and Noise Reduction: Motor base plates help reduce vibrations and noise generated by electric motors. They provide a stable and rigid structure that minimizes the transmission of motor vibrations to the surrounding equipment and structures. This helps prevent excessive noise, enhances workplace safety, and reduces the risk of mechanical wear and damage caused by vibration-induced fatigue.
4. Safety and Stability: The motor base plate enhances the safety and stability of the motor installation. It helps secure the motor in place, preventing unintended movement or displacement during operation. This is especially critical in industrial environments where shock and vibration can be present. The base plate’s stability ensures reliable and safe motor operation.
5. Maintenance and Serviceability: Motor base plates facilitate maintenance and serviceability tasks. They provide easy access to the motor for inspection, maintenance, and repairs. By securely holding the motor in place, the base plate allows technicians to safely perform tasks such as motor alignment adjustments, bearing replacements, or belt changes.
6. Flexibility and Adaptability: Motor base plates are designed to accommodate different motor sizes, types, and mounting configurations. They offer flexibility and adaptability, allowing for the installation of various motor models without the need for significant modifications or customizations. This simplifies the motor replacement process or the integration of motors into different industrial applications.
Overall, motor base plates play a vital role in industrial applications by providing a stable mounting platform, facilitating precise alignment, reducing vibrations and noise, ensuring safety and stability, enabling maintenance tasks, and offering flexibility for motor installation and adaptation.
editor by CX 2024-05-03
China High Torque Silicon Wire 24V Planetary Motor for Hand Drill with Double Ball Bearing motor efficiency
Item Description
Item Description
one. This motor use Pure Copper Wire, Not Aluminium Wire, So the motor is much more reliable and lengthy life time.
two. This motor use ball bearing, more stable and safer when motor running.
3. Voltage :110V-230V
4.Rated Speed :1000rpm-30000rpm
5.Common Software:Information equipments, digital toys, home programs, electronic lock, digital camera, automatic merchandise
six. Insulation Course: A B F H
| Typical design load performance | ||||||||
| Type | Voltage Range(V) | Rated Voltage (V) | Velocity (RPM) | Current (A) | Pace (RPM) | Recent (A) | P(W) | Max Eff.(%) |
| P2735 | seventy five.5 | 230 | .eighty two | one hundred sixty | ten thousand | a hundred | one hundred twenty | seventy five.3 |
| P2735 | seventy five | a hundred and twenty | two.05 | 235 | 12000 | one hundred forty five.six | 191 | 81.2 |
| P2738 | 78 | 220 | one.11 | 240 | 11000 | 149.2 | 172 | 71.six |
Simple Information
| Enterprise Kind: | Maker | |
| Principal Products: | Thermal Fuse,Thermostat,Shaded Pole Motor,Synchronous Motor,Ozone Generator | |
| Variety Of Workers: | one hundred and one – two hundred Individuals |
Trade & Marketplace
| Major Marketplaces: | Jap Europe South The us Western Europe North America Southeast Asia Mid East |
|
| Whole Yearly Income Volume: | Earlier mentioned US$a hundred Million | |
| Export Percentage: | 71% – eighty% |
Manufacturing facility Information
| Manufacturing facility Dimension (Sq.meters): | thirty,000-fifty,000 square meters | |
| No. of Manufacturing Strains: | Above ten | |
| Quantity of R&D Employees: | 41 – 50 Men and women | |
| Number of QC Workers: | forty one – fifty People | |
| Contract Producing: | OEM Services Offered Design and style Provider Offered Consumer Label Supplied |
Our business FAQ for you
(1) Q: What variety motors you can provide?
A:For now,we primarily supply Kitchen Hood Motor,DC Motor,Gear Motor,Admirer Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it possible to pay a visit to your factory
A: Confident. But remember to kindly maintain us posted a few times in progress. We want to examine our
plan to see if we are obtainable then.
(3) Q: Can I get some samples
A: It depends. If only a number of samples for private use or substitute, I am concerned it will
be tough for us to provide, due to the fact all of our motors are custom made produced and no stock
available if there is no more needs. If just sample tests prior to the official get and
our MOQ, price and other phrases are appropriate, we would really like to give samples.
(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is among a thousand~10,000pcs for different types after sample acceptance.
But it is also ok for us to acknowledge more compact plenty like a number of dozens, hundreds or 1000’s
For the initial 3 orders following sample approval.For samples, there is no MOQ prerequisite. But the much less the much better (like no much more than 5pcs) on problem that the amount is adequate in circumstance any modifications essential right after initial testing.
ABOUT US
Ritscher group was proven in 2006.we usually focus on micro-motors for family and industrial electrical appliance.At present, we have professional micro-motor factories separatlly located in ZheJiang & ZHangZhoug province.It has 50,000 square meters plants and a lot more than five hundred personnel, annual output is 5 million pcs and has 10 million pcs yearly generating potential.Right after a long time growth,we developed a great popularity in the domestic and oversea industry and have the have faith in from our global clients.
We started our organization from shaded pole motors, right after 10 many years development,our items is enlarged to BLDC motors ,capacitor motors ,synchronous motors,stepping motors,servo motors, and PMDC motors.Our products are widely utilized for producing fridges, freezers, micro-wave ovens, air heaters, air exhausters, ventilators,ovens, air filter, massage devices and a lot of other equipments.
To layout the lastest technological innovation motors and meet up with our clients requirments,we have the extremely able R&D team,to ensure our products quality ,we have extremely stringent handle method for our generation section & QC division,to make our value decrease,we have the very professional purchase division, We devote to make every single particulars better than we could do.
To offer you rapid and far better services to our consumers in Australia and New Zeland,we established up department office in Australia because 2017 with exprienced consultant to support the enterprise ,which will bring much more customers to get know of us.
We will keep performing our occupation,go forward phase by phase to make our business spot wider and brighter.
|
/ Piece | |
500 Pieces (Min. Order) |
###
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Constant Speed |
| Excitation Mode: | Excited |
| Function: | Control, Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 2 |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| Typical model load performance | ||||||||
| Type | Voltage Range(V) | Rated Voltage (V) | Speed (RPM) | Current (A) | Speed (RPM) | Current (A) | P(W) | Max Eff.(%) |
| P2735 | 75.5 | 230 | 0.82 | 160 | 10000 | 100 | 120 | 75.3 |
| P2735 | 75 | 120 | 2.05 | 235 | 12000 | 145.6 | 191 | 81.2 |
| P2738 | 78 | 220 | 1.11 | 240 | 11000 | 149.2 | 172 | 71.6 |
###
| Business Type: | Manufacturer | |
| Main Products: | Thermal Fuse,Thermostat,Shaded Pole Motor,Synchronous Motor,Ozone Generator | |
| Number Of Employees: | 101 – 200 People |
###
| Main Markets: | Eastern Europe South America Western Europe North America Southeast Asia Mid East |
|
| Total Annual Sales Volume: | Above US$100 Million | |
| Export Percentage: | 71% – 80% |
###
| Factory Size (Sq.meters): | 30,000-50,000 square meters | |
| No. of Production Lines: | Above 10 | |
| Number of R&D Staff: | 41 – 50 People | |
| Number of QC Staff: | 41 – 50 People | |
| Contract Manufacturing: | OEM Service Offered Design Service Offered Buyer Label Offered |
|
/ Piece | |
500 Pieces (Min. Order) |
###
| Application: | Universal, Industrial, Household Appliances, Car, Power Tools |
|---|---|
| Operating Speed: | Constant Speed |
| Excitation Mode: | Excited |
| Function: | Control, Driving |
| Casing Protection: | Protection Type |
| Number of Poles: | 2 |
###
| Samples: |
US$ 0/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
|---|
###
| Typical model load performance | ||||||||
| Type | Voltage Range(V) | Rated Voltage (V) | Speed (RPM) | Current (A) | Speed (RPM) | Current (A) | P(W) | Max Eff.(%) |
| P2735 | 75.5 | 230 | 0.82 | 160 | 10000 | 100 | 120 | 75.3 |
| P2735 | 75 | 120 | 2.05 | 235 | 12000 | 145.6 | 191 | 81.2 |
| P2738 | 78 | 220 | 1.11 | 240 | 11000 | 149.2 | 172 | 71.6 |
###
| Business Type: | Manufacturer | |
| Main Products: | Thermal Fuse,Thermostat,Shaded Pole Motor,Synchronous Motor,Ozone Generator | |
| Number Of Employees: | 101 – 200 People |
###
| Main Markets: | Eastern Europe South America Western Europe North America Southeast Asia Mid East |
|
| Total Annual Sales Volume: | Above US$100 Million | |
| Export Percentage: | 71% – 80% |
###
| Factory Size (Sq.meters): | 30,000-50,000 square meters | |
| No. of Production Lines: | Above 10 | |
| Number of R&D Staff: | 41 – 50 People | |
| Number of QC Staff: | 41 – 50 People | |
| Contract Manufacturing: | OEM Service Offered Design Service Offered Buyer Label Offered |
Dynamic Modeling of a Planetary Motor
A planetary gear motor consists of a series of gears rotating in perfect synchrony, allowing them to deliver torque in a higher output capacity than a spur gear motor. Unlike the planetary motor, spur gear motors are simpler to build and cost less, but they are better for applications requiring lower torque output. That is because each gear carries the entire load. The following are some key differences between the two types of gearmotors.
planetary gear system
A planetary gear transmission is a type of gear mechanism that transfers torque from one source to another, usually a rotary motion. Moreover, this type of gear transmission requires dynamic modeling to investigate its durability and reliability. Previous studies included both uncoupled and coupled meshing models for the analysis of planetary gear transmission. The combined model considers both the shaft structural stiffness and the bearing support stiffness. In some applications, the flexible planetary gear may affect the dynamic response of the system.
In a planetary gear device, the axial end surface of the cylindrical portion is rotatable relative to the separating plate. This mechanism retains lubricant. It is also capable of preventing foreign particles from entering the planetary gear system. A planetary gear device is a great choice if your planetary motor’s speed is high. A high-quality planetary gear system can provide a superior performance than conventional systems.
A planetary gear system is a complex mechanism, involving three moving links that are connected to each other through joints. The sun gear acts as an input and the planet gears act as outputs. They rotate about their axes at a ratio determined by the number of teeth on each gear. The sun gear has 24 teeth, while the planet gears have three-quarters that ratio. This ratio makes a planetary motor extremely efficient.
planetary gear train
To predict the free vibration response of a planetary motor gear train, it is essential to develop a mathematical model for the system. Previously, static and dynamic models were used to study the behavior of planetary motor gear trains. In this study, a dynamic model was developed to investigate the effects of key design parameters on the vibratory response. Key parameters for planetary gear transmissions include the structure stiffness and mesh stiffness, and the mass and location of the shaft and bearing supports.
The design of the planetary motor gear train consists of several stages that can run with variable input speeds. The design of the gear train enables the transmission of high torques by dividing the load across multiple planetary gears. In addition, the planetary gear train has multiple teeth which mesh simultaneously in operation. This design also allows for higher efficiency and transmittable torque. Here are some other advantages of planetary motor gear trains. All these advantages make planetary motor gear trains one of the most popular types of planetary motors.
The compact footprint of planetary gears allows for excellent heat dissipation. High speeds and sustained performances will require lubrication. This lubricant can also reduce noise and vibration. But if these characteristics are not desirable for your application, you can choose a different gear type. Alternatively, if you want to maintain high performance, a planetary motor gear train will be the best choice. So, what are the advantages of planetary motor gears?
planetary gear train with fixed carrier train ratio
The planetary gear train is a common type of transmission in various machines. Its main advantages are high efficiency, compactness, large transmission ratio, and power-to-weight ratio. This type of gear train is a combination of spur gears, single-helical gears, and herringbone gears. Herringbone planetary gears have lower axial force and high load carrying capacity. Herringbone planetary gears are commonly used in heavy machinery and transmissions of large vehicles.
To use a planetary gear train with a fixed carrier train ratio, the first and second planets must be in a carrier position. The first planet is rotated so that its teeth mesh with the sun’s. The second planet, however, cannot rotate. It must be in a carrier position so that it can mesh with the sun. This requires a high degree of precision, so the planetary gear train is usually made of multiple sets. A little analysis will simplify this design.
The planetary gear train is made up of three components. The outer ring gear is supported by a ring gear. Each gear is positioned at a specific angle relative to one another. This allows the gears to rotate at a fixed rate while transferring the motion. This design is also popular in bicycles and other small vehicles. If the planetary gear train has several stages, multiple ring gears may be shared. A stationary ring gear is also used in pencil sharpener mechanisms. Planet gears are extended into cylindrical cutters. The ring gear is stationary and the planet gears rotate around a sun axis. In the case of this design, the outer ring gear will have a -3/2 planet gear ratio.
planetary gear train with zero helix angle
The torque distribution in a planetary gear is skewed, and this will drastically reduce the load carrying capacity of a needle bearing, and therefore the life of the bearing. To better understand how this can affect a gear train, we will examine two studies conducted on the load distribution of a planetary gear with a zero helix angle. The first study was done with a highly specialized program from the bearing manufacturer INA/FAG. The red line represents the load distribution along a needle roller in a zero helix gear, while the green line corresponds to the same distribution of loads in a 15 degree helix angle gear.
Another method for determining a gear’s helix angle is to consider the ratio of the sun and planet gears. While the sun gear is normally on the input side, the planet gears are on the output side. The sun gear is stationary. The two gears are in engagement with a ring gear that rotates 45 degrees clockwise. Both gears are attached to pins that support the planet gears. In the figure below, you can see the tangential and axial gear mesh forces on a planetary gear train.
Another method used for calculating power loss in a planetary gear train is the use of an auto transmission. This type of gear provides balanced performance in both power efficiency and load capacity. Despite the complexities, this method provides a more accurate analysis of how the helix angle affects power loss in a planetary gear train. If you’re interested in reducing the power loss of a planetary gear train, read on!
planetary gear train with spur gears
A planetary gearset is a type of mechanical drive system that uses spur gears that move in opposite directions within a plane. Spur gears are one of the more basic types of gears, as they don’t require any specialty cuts or angles to work. Instead, spur gears use a complex tooth shape to determine where the teeth will make contact. This in turn, will determine the amount of power, torque, and speed they can produce.
A two-stage planetary gear train with spur gears is also possible to run at variable input speeds. For such a setup, a mathematical model of the gear train is developed. Simulation of the dynamic behaviour highlights the non-stationary effects, and the results are in good agreement with the experimental data. As the ratio of spur gears to spur gears is not constant, it is called a dedendum.
A planetary gear train with spur gears is a type of epicyclic gear train. In this case, spur gears run between gears that contain both internal and external teeth. The circumferential motion of the spur gears is analogous to the rotation of planets in the solar system. There are four main components of a planetary gear train. The planet gear is positioned inside the sun gear and rotates to transfer motion to the sun gear. The planet gears are mounted on a joint carrier that is connected to the output shaft.
planetary gear train with helical gears
A planetary gear train with helical teeth is an extremely powerful transmission system that can provide high levels of power density. Helical gears are used to increase efficiency by providing a more efficient alternative to conventional worm gears. This type of transmission has the potential to improve the overall performance of a system, and its benefits extend far beyond the power density. But what makes this transmission system so appealing? What are the key factors to consider when designing this type of transmission system?
The most basic planetary train consists of the sun gear, planet gear, and ring gear elements. The number of planets varies, but the basic structure of planetary gears is similar. A simple planetary geartrain has the sun gear driving a carrier assembly. The number of planets can be as low as two or as high as six. A planetary gear train has a low mass inertia and is compact and reliable.
The mesh phase properties of a planetary gear train are particularly important in designing the profiles. Various parameters such as mesh phase difference and tooth profile modifications must be studied in depth in order to fully understand the dynamic characteristics of a PGT. These factors, together with others, determine the helical gears’ performance. It is therefore essential to understand the mesh phase of a planetary gear train to design it effectively.
editor by CX 2023-03-31
China factory Fan motor 775795895 high speed and high torque double ball bearing 12V mini DC motor with high quality
Model Number: 775/795/895
Usage: FAN
Type: Micro Motor
More details: please contact us
Packaging Details: carton
Port: ShenZhen
Fan motor 775/795/895 high speed and high torque double ball bearing 12V mini DC motor
Product name: 775 motor ball bearing motor
Speed: 12000 / min
Rated voltage: 12V
Rated power: 100W
Rated current: 1.2a
The diameter of axle: 5 mm
Weight: 343 g
Scope of application: car washing pump, spray machine, electric fan, shredder, etc
Note: switching power supply or battery dc power supply is recommended for starting current above 10A
Product name: 795 motor ball bearing motor
Speed: 10000 / min
Rated voltage: 12V
Rated power: 100W
Rated current: 1.2a
The diameter of axle: 5 mm
Weight: 375 g
Scope of application: car washing pump, spray machine, electric fan, shredder, etc
Note: switching power supply or battery dc power supply is recommended for starting current above 10A
Product name: 895 motor ball bearing motor
Speed: 6000 / min
Rated voltage: 12V
Rated power: 80W
Rated current: 0.8a
The diameter of axle: 5 mm
Weight: 501 g
Scope of application: car washing pump, spray machine, electric fan, shredder, etc
Note: switching power supply or battery dc power supply is recommended for starting current above 10A
Company InformationWe specialize in the production of various electronic components. Our mission is to provide customers with the best service, committed to establishing long-term cooperation with customers, looking forward to working with you.
Our Services1. Listen carefully to customer requests and provide different types of electronic products to meet customer requirements.2. Respond to customer requests within 10 minutes of working hours to provide the best price to customers.3. Patience and customer communication, and strive to meet customer requirements.4. Quickly create a payment order so customers don’t have to wait. Accept convenient payment methods: customers can make payment by alibaba trade assurance, Paypal, Credit Card, Bank Wire Transfer, Western Union, etc.5. Produce high quality products, test, package and produce 100% qualified products.6. Select the courier company requested by the customer to deliver quickly7. The customer receives the product and the order is completed.
FAQ
Question
Answer
Q1:Why choose Alisi?
1.We are Alibaba Assessed Gold Supplier.2. We have best quality control, Best Service and competitive Price.3.100% QC inspection Before Shipment.
Q2:Can I get samples?
Yes, certainly. We will provide the existing samples for free, Sample fee is refundable when you make an order from us.
Q3.What about the lead time?
When you complete the payment, we will send it to you within 1-3 days. According to the courier company you choose, you can receive our products in front of your house in the fastest 3-5 days.
Q4:What are the certifications do you have?
As showed in the section of company information, we have CE, FCC, ROSH certifications. As you can see, our company has a strong competitives and great qualified in our business area. We aim to provide the best quality and services to all global clients.
Q5:What is the payment method we can support?
You can pay by TT transfer, Western Union and credit card through Paypal, which offers total buyer protection;
Certifications
Packaging & ShippingPackingWe have a professional packaging team. We will use foam wrap to prevent the product from being squeezed and use a solid carton for the outer packaging, which can effectively protect the safety of the product. The outer layer will be completely sealed with tape and can be effectively waterproof. We will assure you that the product will not be damaged during transportation.
DeliveryWe have cooperated with many international express delivery companies, including DHL, FedEx UPS, TNT, EMS, China/HK Post, CDEK, ARAMEX, SF, etc. According to your needs, we can choose the cheapest and fastest delivery for you.
Contact Us
How to Assemble a Planetary Motor
A Planetary Motor uses multiple planetary surfaces to produce torque and rotational speed. The planetary system allows for a wide range of gear reductions. Planetary systems are particularly effective in applications where higher torques and torque density are needed. As such, they are a popular choice for electric vehicles and other applications where high-speed mobility is required. Nevertheless, there are many benefits associated with using a planetary motor. Read on to learn more about these motors.
VPLite
If you’re looking to replace the original VP, the VPLite has a similar output shaft as the original. This means that you can mix and match your original gear sets, including the input and output shafts. You can even mix metal inputs with plastic outputs. Moreover, if you decide to replace the gearbox, you can easily disassemble the entire unit and replace it with a new one without losing any output torque.
Compared to a planetary motor, a spur gear motor uses fewer gears and is therefore cheaper to produce. However, the latter isn’t suitable for high-torque applications. The torque produced by a planetary gearmotor is evenly distributed, which makes it ideal for applications that require higher torque. However, you may have to compromise on the torque output if you’re looking for a lightweight option.
The VersaPlanetary Lite gearbox replaces the aluminum ring gear with a 30% glass-filled nylon gear. This gearbox is available in two sizes, which means you can mix and match parts to get a better gear ratio. The VPLite gearbox also has a female 5mm hex output shaft. You can mix and match different gearboxes and planetary gearboxes for maximum efficiency.
VersaPlanetary
The VersaPlanetary is a highly versatile planetary motor that can be mounted in a variety of ways. Its unique design includes a removable shaft coupler system that makes it simple to swap out the motor with another. This planetary motor mounts in any position where a CIM motor mounts. Here’s how to assemble the motor. First, remove the hex output shaft from the VersaPlanetary output stage. Its single ring clip holds it in place. You can use a drill press to drill a hole into the output shaft.
After mounting the gearbox, you can then mount the motor. The mounting hardware included with the VersaPlanetary Planetary Motor comes with four 10-32 threaded holes on a two-inch bolt circle. You can use these holes to mount your VersaPlanetary on a CIM motor or a CIM-compatible motor. Once assembled, the VersaPlanetary gearbox has 72 different gear ratios.
The VersaPlanetary gearbox is interchangeable with regular planetary gearboxes. However, it does require additional parts. You can purchase a gearbox without the motor but you’ll need a pinion. The pinion attaches to the shaft of the motor. The gearbox is very sturdy and durable, so you won’t have to worry about it breaking or wearing out.
Self-centering planetary gears
A planetary motor is a simple mechanical device that rotates around a axis, with the planets moving around the shaft in a radial direction. The planets are positioned so that they mesh with both the sun gear and the output gears. The carrier 48 is flexibly connected to the drive shaft and can move depending on the forces exerted by the planet gears. In this way, the planets can always be in the optimal mesh with the output gears and sun gear.
The first step in developing a planetary gear motor is to identify the number of teeth in each planet. The number of teeth should be an integer. The tooth diameters of the planets should mesh with each other and the ring. Typically, the teeth of one planet must mesh with each other, but the spacing between them must be equal or greater than the other. This can be achieved by considering the tooth count of each planet, as well as the spacing between planets.
A second step is to align the planet gears with the output gears. In a planetary motor, self-centering planetary gears must be aligned with both input and output gears to provide maximum torque. For this to be possible, the planet gears must be connected with the output shaft and the input shaft. Similarly, the output shaft should also be able to align with the input gear.
Encoders
A planetary geared motor is a DC motor with a planetary gearbox. The motor can be used to drive heavy loads and has a ratio of 104:1. The shaft speed is 116rpm when it is unloaded. A planetary gearbox has a low backlash and is often used in applications that need high torque. Planetary Motor encoders can help you keep track of your robot’s position or speed.
They are also able to control motor position and speed with precision. Most of them feature high resolution. A 0.18-degree resolution encoder will give you a minimum of 2000 transitions per rotation between outputs A and B. The encoder is built to industrial standards and has a sturdy gearbox to avoid damage. The encoder’s robust design means it will not stall when the motor reaches its maximum speed.
There are many advantages to a planetary motor encoder. A high-quality one will not lose its position or speed even if it’s subject to shocks. A good quality planetary motor will also last a long time. Planetary motors are great for resale or for your own project. If you’re considering buying a planetary motor, consider this information. It’ll help you decide if a particular model is right for your needs.
Cost
There are several advantages of planetary motors. One of the biggest is their cost, but they can also be used in many different applications. They can be combined with a variety of gearboxes, and are ideal for various types of robots, laboratory automation, and production applications. Planetary gearboxes are available in many different materials, and plastic planetary gearboxes are an economical alternative. Plastic gearboxes reduce noise at higher speeds, and steel input stage gears are available for high torques. A modified lubrication system can help with difficult operating conditions.
In addition to being more durable, planetary motors are much more efficient. They use fewer gears, which lowers the overall cost of production. Depending on the application, a planetary motor can be used to move a heavy object, but is generally less expensive than its counterpart. It is a better choice for situations where the load is relatively low and the motor is not used frequently. If you need a very high torque output, a planetary motor may be the better option.
Planetary gear units are a good choice for applications requiring high precision, high dynamics, and high torque density. They can be designed and built using TwinCAT and TC Motion Designer, and are delivered as complete motor and gear unit assemblies. In a few simple steps, you can calculate the torque required and compare the costs of different planetary gear units. You can then choose the best model for your application. And because planetary gear units are so efficient, they are a great option for high-end industrial applications.
Applications
There are several different applications of the planetary motor. One such application is in motion control. Planetary gearboxes have many benefits, including high torque, low backlash, and torsional stiffness. They also have an extremely compact design, and can be used for a variety of applications, from rack and pinion drives to delta robotics. In many cases, they are less expensive to manufacture and use than other types of motors.
Another application for planetary gear units is in rotary tables. These machines require high precision and low backlash for their precise positioning. Planetary gears are also necessary for noise reduction, which is a common feature in rotary tables. High precision planetary gears can make the height adjustment of OP tables a breeze. And because they are extremely durable and require low noise, they are a great choice for this application. In this case, the planetary gear is matched with an AM8000 series servomotor, which gives a wide range of choices.
The planetary gear transmission is also widely used in helicopters, automobiles, and marine applications. It is more advanced than a countershaft drive, and is capable of higher torque to weight ratios. Other advantages include its compact design and reduced noise. A key concern in the development of this type of transmission is to minimize vibration. If the output of a planetary gear transmission system is loud, the vibration caused by this type of drive system may be too loud for comfort.
8X34X10mm Cheap made in China – replacement parts – in Kayamkulam India U Groove Aluminum Profile Door & Window Bearing with top quality
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing facility in China with 5 different branches. For much more information: Cellular/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
| Name: | PL608-34 sliding roller |
| Merchandise No.: | PL608-34 |
| Resources: | carbon metal +Nylon/POM |
| High quality: | Inexpensive price with very good top quality |
| Roller dimension: | 8x34x10mm |
| Bodyweight: | 20g/pcs |
| MOQ: | 20000pcs |
| Application: | window/doorway/wardrobe/cabinet/sport gear/toys |
| Style: | YCZCO,OEM,ODM is satisfactory |
| Package deal: | Industrial packing or in accordance to buyers’ need |
| Payment: | A:100%TT B:30% T/T in advance,70% equilibrium prior to cargo |
The merchandise from YCZCO are largely used for doorway, window, toy, fishing gear, wire rope, truck curtain, grocery store trolley, sport tools, upper body, shower place, funiture and elevator doorway.
YCZCO is a one-quit provider of miniature bearing and roller, is the mo EPT comprehensive sector group of manufacturing organization. Personal brand name YCZCO and patent engineering, has the considerable study and growth team, from the composition design and style, mold production, appearance layout, and EPT fields are concentrated the industry’s mo EPT outstanding technological staff.
YCZCO has build the best R&D project management mechanism, in addition to the analysis and layout capability consistently improve fashion assortment, in such facet as application of new components, new engineering also accrued far more research and improvement, in the sector leading action by phase. Pay interest to the innovative overseas technologies in domestic all types of products and creation engineering, the software of info gleaned from the latest products.
Large-scale generation, to guarantee Xihu (We EPT Lake) Dis. powerful products supply and distribute capabilities, can be in time for the common customers and customers to supply the essential items.
YCZCO have 4 factories, a single is found in ZheJiang province, a single is located in ZheJiang province, EPT are found in ZheJiang g province, the workers are over 200pcs.
Adhere to are the devices in our manufacturing unit:
| No. | Equipment identify | Quantity |
| 1 | Lathe device | 316 sets |
| 2 | grinder equipment | 246 sets |
| 3 | assemble device | a hundred sets |
| four | clear machine | fifteen sets |
| 5 | injection equipment | 15 sets |
| six | vibration meter | 13 sets |
| 7 | hardness tester | 2 sets |
YCZCO have been generating bearing & roller for 17 a long time, attended the Canton Honest and EPT oversea exhibition every single calendar year, our items are offered to all more than the planet.
Packing item: the within packing is polybag, the outdoors packing is blank carton, according to the need, we also can pack the goods on wood pallet
EPT is suitable, it would be better to ship us samples.
If you have any needs for the earlier mentioned roller, welcome to make contact with me !!
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears manufacturing unit in China with 5 different branches. For far more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of unique tools manufacturer’s (OEM) portion quantities or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our firm and the outlined substitution parts contained herein are not sponsored, approved, or produced by the OEM.
Multiple manufacturer made in China – replacement parts – in Queretaro Mexico Pulleys Stainless Steel Flat Mount Nylon Pulley V Belt Wheels Flat Wire Rope Sheave Aluminum Bearing Oversized CeraEPT Electromagnetic Clutch Metal with top quality
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
multiple pulleys stainless steel flat mount nylon pulley v belt whee EPT flat wire rope sheave aluminum bearing Oversized Ceramic Electromagnetic Clutch Metal
We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.