Tk Series Synchronous Motor for Drive Compressors and Pumps Tk2800-18 2600 2800kv 6kv IP20

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk2800-18 2600 2800kv 6kv IP20

I. Overview
The big a few-phase synchronous motor for TK series air compressor is a large-overall performance series merchandise specially made and developed by our business for the load of air compressor.
This collection of motors adopts new technological innovation, new components, new procedures, exquisite material variety, and advanced production. It has the qualities of little dimension, mild bodyweight, lovely physical appearance, higher performance, low sounds, reduced vibration, risk-free and dependable procedure, and handy use and servicing.

2. Implementation standards
GB755 Rotating Motor Ranking and Functionality
Classification of GB/T997 rotary motor framework kind, set up kind and junction box placement (IM code)
GB/T1571 3-stage synchronous motor check technique
GB/T1993 Rotating Device Cooling Approach
GB/T4942.1 Safety class (IP) classification of the all round construction of rotating electrical equipment
GB/T10068 The measurement, analysis and limit of mechanical vibration with a shaft middle top of 56mm and earlier mentioned
GB/T10069 Rotating Device Sound Measurement Strategy and Restrict
JB/T8667.one CZPT Problems of Massive A few-period Synchronous Motor Element one: TK Sequence
3. Basic specialized parameters
Electricity range: 250~10000KW
Rated voltage: 6000, 10000V
Rated pace: 250, 273, three hundred, 333, 375, 428, 500, 600r/min
Rated frequency: 50HZ
Safety degree: IP00, IP20, IP23, IP44
Insulation course: F
Quota: SI
Cooling strategy: IC01, IC37, IC81W
Set up strategy: IM7311, IM5710, IM7312, IM7315
*Can be made in accordance to other parameters in accordance to person wants
Four, technological traits
four.one The structural design is sensible, protected and reputable, and the ability to action out of step is robust.
4.2 The principal insulation structure using new insulating components has higher voltage resistance and extended motor daily life.
4.three The temperature increase margin is big. The motor adopts F-class insulation, and the temperature rise is assessed according to the temperature rise limit of the B pole insulation.
4.four The protection system is innovative and complete.
four.one.one The stator windings and bearings are outfitted with temperature detection products, which can detect, alarm and excursion.
4.four.2 Shutdown room heater with anti-condensation influence.
4.5 Big inertia. Motors with various moments of inertia can be made according to consumer needs.
Five, composition variety
five.one The overall construction of this sequence of motors is welded with steel plates for the body, conclude protect, and base plate. The motor is an impartial cavity, and the slip ring can be developed with distinct security levels in accordance to consumer needs.
five.2 Stator: The stator frame is welded by metal plate. The motor stator outlet is led out by a large-voltage rubber cable. The outlet situation can be led out from the decrease component of the foundation or from the primary junction box on the side of the motor.
The stator core is superimposed by low-reduction silicon metal sheets, and the main sections are separated by radial air flow ducts.
The stator winding is F grade insulation, and the temperature increase is assessed in accordance to B quality to help prolong the services daily life. It adopts VPI total dipping paint treatment, which has higher electrical performance, mechanical strength, insulation performance, humidity resistance and thermal steadiness.
5.three The rotor magnetic pole core is produced of laminated steel plates, and has diverse buildings this kind of as magnetic pole screws and T tails. The rotor bracket has air flow holes and is geared up with a enthusiast, which can properly management the temperature rise of the rotor.
5.four Adopt seat variety spherical sliding bearing. The bearings are insulated to stop shaft currents.
Use new lubricating oil and slender-walled bearing alloy tiles, and set electromagnetic centerline indicators.
5.5 In accordance to consumer requirements, the slip ring can be designed as a good stress air flow framework to boost the security of the motor. The overall size of the motor with the constructive pressure air flow construction of the slip ring is a bit elevated.
six. Circumstances of Use
six.one Voltage fluctuation: ±5% (It can operate beneath ±10% below the conditions of 7.three in GB755)
six.two Frequency fluctuation: ±2%
6.3 The altitude does not exceed 1000m
6.four The maximum ambient temperature does not exceed +40ºC, and the least is 0ºC.
7, model description
 TK1250-sixteen/2150

Outer diameter of stator punch (Φ2150mm)

Amount of poles (sixteen poles)

Rated energy (1250KW)
A few-period synchronous motor for compressor
8. Buying instructions
eight.one Before inserting an get, remember to refer to the item catalog of this collection to make clear the necessary product design, specs and other info. If there is a discrepancy in between the specifications and the samples, make sure you make contact with our firm.
8.2 The motor design, rated power, synchronous pace, rated voltage, rated frequency, security degree, minute of inertia, rotation course, set up type, etc. have to be indicated when buying.
8.3 The sample complex information sheet only lists the related knowledge of motors with rated voltages of 6KV and 10KV. If end users require other voltage amounts, our organization can also provide related technical data when ordering.
8.4 The specialized information and dimensions in the sample are only for reference when the user selects the design. The official info will be offered by the business following the agreement or complex arrangement is signed.
eight.5 If there are any other special demands, make sure you provide the requirements and indicator the relevant technical agreement when buying.

Tk Series Synchronous Motor for Drive Compressors and Pumps Tk2800-18 2600 2800kv 6kv IP20