CR-601ST lab high quality microtome

CR-601ST lab high quality microtome

You can view movie of our microtome in Youtube:
https://youtu.be/3s3WeHQ12h4

Des.:This device can be operated with 2 modes: panel handle mode, and twond  hand wheel management method.
Rotate the twond smaller hand wheel (which controls the servo motor in the equipment) at the left side of the instrument clockwise or counter-clockwise, to permit fast motion of the specimen feed or retraction. It imitates a completely manual working equipment. This operate meets the requirements of skillful operators, and enhancing the work performance tremendously.
The operators can also press the buttons on the panel to permit the motion of specimen feed or retraction, like a normal semi-computerized instrument does.
The operators can perform alternatively with the two management modes.

Solution Info
This device can be operated with two modes: panel control method, and 2nd  hand wheel management manner.
Rotate the 2nd smaller hand wheel (which controls the servo motor in the machine) at the remaining aspect of the instrument clockwise or counter-clockwise, to permit quick motion of the specimen feed or retraction. It imitates a fully handbook working equipment. This operate fulfills the demands of skillful operators, and enhancing the function efficiency drastically.
The operators can also press the buttons on the panel to permit the movement of specimen feed or retraction, like a normal semi-computerized instrument does.
The operators can perform alternatively with the two management modes.
CZPT specification:
Sectioning thickness variety: 0.five~100μm
Setting values: from .5~5μm in .5μm increments
from five~20μm in 1μm increments
from 20~50μm in 5μm increments
from 50~100μm in 10μm increments
Trimming thickness range:1~600μm
Environment values:from 1~10μm in 1μm increments
from ten~20μm in 2μm increments
from twenty~50μm in 5μm increments
from 50~100μm in 10μm increments
from a hundred~600μm in 50μm increments
Object feed: 24±1mm
Vertical specimen stroke: 70±1mm
Specimen orientation:horizontal: ±8°, vertical: ±8°
Specimen retraction:5 – a hundred μm,in five μm increments, can be turned off
CZPT coarse feed:twenty μm/click on and 1000(2000)μm/s
Blade holder foundation movement:± 24 mm
Greatest specimen dimensions (L x H x W):50 x sixty x 40mm
Dimensions fundamental instrument:
Width (incl. 2 handwheels on the two sides):480mm
Depth (incl. waste tray):577mm
Top:286mm
Net Weight :29 kg
Function temperature:+10ºC~+35ºC
Operate humidity:<80%, no condensation water
Nominal supply voltages:100~240V AC (±20V)
Nominal frequency:fifty/60 Hz
Energy attract:70W

Attribute:
one)Gives two sectioning modes: conventional entire handwheel rotation mode, and rocking mode.

two)Precision specimen orientation with clear zero reference position.

three)Non-stick coating plate.
The blade holder in the instrument is used non-stick coating and remedy, which allows the specimen to be stick-cost-free and hence achieves smoothing sectioning and easy cleaning

4)Ergonomics and user safety.
The sleek-running security hand-wheel has an ergonomically shaped deal with. A hand-wheel locking unit for one particular-thumb operation locks the specimen head in the uppermost situation, which is excellent for changing the specimen and/or bladeA second locking mechanism on the microtome foundation allows locking the object head in any placement.

5)The humanized style of the foldable deal with in the back of the machine.
Unfold the deal with to shift the machine conveniently.Fold the manage soon after the device is positioned properly.

6)Handy handle panel
The user can press the button to set sectioning parameters, this kind of as trimming thickness, sectioning thickness, number of sectioning, length to the blade, retraction symbol and locking symbol.

seven)Graduation of the blade holder base
There is graduation on the correct facet of the microtome blade holder base, supporting to change the blade to an suitable angle.

eight)Mouse handle choice

9)Vehicle hibernation
The display screen will be place to slumber in 15 minutes after the equipment stops doing work. Press any button to wake it up.

ten)Long specimen stroke
The instrument provides a specimen stroke as long as 70mm, enabling larger specimen sectioning and longer distance from the blade and thus attaining improved basic safety whilst shifting specimen.

eleven)Specimen retraction:
It gives specimen retraction function, which can be switched on/off by prolonged pressing the Mode button on the panel. As soon as it is on, two arrow symbols are shown. The symbols disappears on the monitor when the manner is off.

12)Thickness summing up function

 

CR-601ST lab high quality microtome